Poor Ventilation; Basic Boat Operation (Non-Dts Models); Launching And Boat Operation; Operation Chart - Mercury 4.3 MPI SeaCore Operation & Maintenance Manual

Table of Contents

Advertisement

Section 2 - On the Water
Example of desired air flow through the boat:

Poor Ventilation

Under certain running or wind conditions, permanently enclosed or canvas enclosed cabins or cockpits with insufficient
ventilation may draw in carbon monoxide. Install one or more carbon monoxide detectors in your boat.
Although the occurrence is rare, on a very calm day, swimmers and passengers in an open area of a stationary boat that
contains or is near a running engine may be exposed to a hazardous level of carbon monoxide.
1.
Examples of poor ventilation while the boat is stationary:
a
2.
Examples of poor ventilation while the boat is moving:
a
Basic Boat Operation (Non‑DTS Models)

Launching and Boat Operation

IMPORTANT: Install bilge drain plug prior to launching boat.

Operation Chart

BEFORE STARTING
Install bilge drain plug.
Open engine hatch.
Page 26
b
b

Operation Chart

AFTER STARTING
Observe all gauges to
check condition of engine.
If not normal, stop engine.
Check for fuel, oil, water,
fluid, and exhaust leaks.
43367
a -
Operating the engine when the boat
is moored in a confined space
b -
Mooring close to another boat that
has its engine operating
21626
a -
Operating the boat with the
trim angle of the bow too
high
b -
Operating the boat with no
forward hatches open
43368
(station wagon effect)
WHILE UNDERWAY
Observe all gauges to
check condition of
engine. If not normal,
stop engine.
Listen for the audio
alarm.
90-8M0113859
AFTER STOPPING
Turn ignition key to the
"OFF" position.
Turn battery switch to the
"OFF" position.
DECEMBER 2015
eng

Advertisement

Table of Contents
loading

This manual is also suitable for:

5.0 mpi seacore

Table of Contents