Advertisement
Quick Links
Operation Manual
Important：Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment
MODELS
JJ - K- Air Cap No. - Fluid Tip Size – Type of Feed (G：Gravity，S：Suction, P：Pressure)
(Ex.)： JJ-K-305MT-1.3-P
SPECIFICATIONS
Maximum Working Air Pressure： 0.69 MPa,
Chart.1
Air Cap No.
Part Number
0.8
-
303
JJ-3-303
-
-
304
JJ-3-304
-
365
○
JJ-3-365
305MT
○
JJ-3-305MT
307MT
○
JJ-3-307MT
PARTS LIST
Chart.2
Ref No.
Part Number
1 JJ-6
2 JJ-50-K5
3 Refer Chart.1
4 Refer Chart.3
5 FUN-35
6 JJ-BODY-G
JJ-BODY-S
7 JJ-44
8 FUN-443
9 FUN-43
10 FUN-25-K5
11 FUN-12
12 Refer Chart.3
13 FUN-14-K5
14 FUN-13-B
15 FUN-463
16 FUN-11-K3
17 FUN-46-K10
18 FUN-45-K5
19 FUN-108
20 JJ-42
21 JJ-30
22 FUN-34
Note) Ref. No. 22 (FUN-34) is needed for Ref. 8 (FUN- 443) installation. When removing it, be careful not to damage the
surface of seat where inserted. A damaged seat can lead to air leakage.
JJ-K GUN
← (No. 305MT – Tip Size 1.3mm – Pressure Type)
Maximum Working Fluid Pressure： 0.69 MPa
Tip size(mm)
1.0
1.3
1.5
1.8
○
-
-
-
○
-
-
-
○
○
○
-
○
○
○
-
○
○
○
-
○
○
-
-
○
○
-
-
Description
Retaining Ring
Ring Seat
Air Cap
Fluid Tip
Fluid Inlet
Gun Body
Pattern Valve Assembly
Valve Seal Kit
Air Valve
Valve Spring
Air Valve Bushing
Needle
Needle Spring
Needle Adjusting Screw
Needle Packing
Packing Gland
E-Ring
Bearing Stud
Trigger
Cheater Valve
Air Connector
Valve Seal Inserting Tool
(Sold separately)
(For GENERAL INDUSTRIES)
Air
Feed
consumption
Gravity
Conventional
80/min
Suction
0.24MPa
Conventional
Gravity
Conventional
145/min
Suction
0.24MPa
Conventional
Pressure
200/min
Conventional
0.24MPa
Pressure
LVMP
220/min
Pressure
0.2MPa
LVMP
Qty
1
1
1
1
1
1
1
1
1
1
1
1
Chart.3
1
1
Description
Size(mm)
1
1.0
1
1.3
1
1.5
1
1.8
0.8 (Pressure)
1
1.0 (Pressure)
1
1.3 (Pressure)
1
1.5 (Pressure)
1
1
Pattern
Fluid
Application
width (mm)
inlet
140
160
General
G1/4
Industries
180
170
200
Fluid Tip
JJ-4-1.0
JJ-4-1.3
JJ-4-1.5
JJ-4-1.8
JJ-440-0.8 (Lapped set)
JJ-440-1.0 (Lapped set)
JJ-440-1.3 (Lapped set)
JJ-440-1.5 (Lapped set)
Air
Weight
inlet
(g)
G1/4
350
Needle
JJ-41-1.0
JJ-41-1.3
JJ-41-1.5
JJ-41-1.8
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DeVilbiss JJ-K Series
Summary of Contents for DeVilbiss JJ-K Series
- Page 1 JJ-K GUN Operation Manual (For GENERAL INDUSTRIES) Important：Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment MODELS JJ - K- Air Cap No. - Fluid Tip Size – Type of Feed (G：Gravity，S：Suction, P：Pressure) ← (No. 305MT – Tip Size 1.3mm – Pressure Type) (Ex.)：...
- Page 2 SAFETY PRECAUTIONS This manual contains information that is important for you to know and understand. This information relates to USER SAFETY and PREVENTING EQIPMENT PROBLEMS. Read and follow SAFETY PRECAUTIONS before using this equipment. FIRE OR EXPLOSION HAZARD 1. When spraying, adequate exhaust must be provided to keep air free of accumulations of flammable vapors which may cause fire or explosion.
- Page 3 PREVENTIVE MAINTENANCE 1. Daily lubrication and cleaning is necessary to maintain the best condition of the gun. 2. To clean the gun body, wipe exterior with solvent dampened cloth. Do not submerge the gun body in solvent as any solids may get into the air passage causing troubles. 3.
- Page 4 SERVICE CHECKS Normal spray pattern problem Cause Correction Will not spray No pressure to gun. Check air and material lines. Adjusting Screw (14) not properly adjusted. Adjust. Improper spray pattern A,B - Material build up on the Air Cap or Fluid Tip. A,B - Clean the Air Cap or Fluid Tip.
Need help?
Do you have a question about the JJ-K Series and is the answer not in the manual?
Questions and answers