Lamps - BMW F800GT Rider's Manual

7
88
Push the rear-wheel stand from
the right onto the rear axle.
Apply the retaining disk from
the left; to do so, press the un-
z
lock button.
Position motorcycle upright
while simultaneously pressing
All manuals and user guides at all-guides.com
grip of stand back so that both
stand rollers rest on ground.
Then press the grip down to
the ground.

Lamps

Replacing low-beam and/
or high-beam bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove cover 1 for high-beam
headlight or cover 2 for low-
beam headlight by pulling on
lever 3.
The alignment of connec-
tor, spring wire strap and
bulb may differ from that shown
in the following illustrations.
Disconnect plug connection 1.