Troubleshooting Guide; Specifications - Samsung yePP MCD-CM600 Instruction Manual

Troubleshooting Guide

Problem
G
G
Unit has no power.
G
G
G
G
G
G
Playback does not
function.
G
Earphones don't work.
G
A sound or track is
G
skipped.
G
Some of the MP3 files on a
CD are not recognized.
G
Firmware cannot be
upgraded.
41
Check
Did you insert the battery with the correct
polarity?
Are the batteries drained?
Is the AC adaptor connected correctly?
Is the door open?
Is the disc inserted correctly?
Is the disc damaged or deformed?
Has the unit been locked with the HOLD switch?
Has the unit been moved from a cold place to a
hot place?
Abrupt change of temperature may cause
condensation to form on the lens. Keep your CD
Player in a warm place until the condensation
on the lens has disappeared.
Is the volume control on the unit at the minimum
setting?
Was the unit jolted or knocked?
Is there dust, fingerprints or scratches on the
disc?
Make sure that the files have correct file
name extensions.
The CD door may have been open or power may
have been disconnected during the upgrade.
Burn the upgrade file onto a CD-ROM in ISO
9660 format and perform the upgrade again.

Specifications

Item
Frequency range
*
Earphone output
*
Signal/noise ratio
*
Total harmonic distortion
*
Format Support
CD-R/RW Readability
File Support
Bit Rate
FM Frequency Range
FM S/N Ratio
FM Stereo Separation
Tag Support
Power Adapter
Internal Rechargeable Batteries
External Batteries
Dimensions
Weight
About File Compatibility
Only MP3, WMA, and Ogg files with the correct file name extensions
G
can be played back.
Description
20Hz ~ 20KHz
320mV(RMS), 6.4mW/CH, 16Ω
90dB (1kHz)
0.08% (1kHz, 0dB)
CD-DA (8Cm/12Cm)
CD-ROM Mode 1, Mode 2 Form 1
ISO 9660, Joliet, Packet writing, UDF
Romeo, Multi-session
MPEG 1 Layer 3, WMA, Ogg
8kbps~320kbps (MP3)
8kbps~192kbps (WMA)
87.50MHz ~ 108.00MHz
58dB
30dB
ID3 VI, ID3 V2 2.0~2.4
DC 4.5V 500mA
Two Square-shaped 1350 mAh Ni-MH Batteries
1.5V AA/LR6 type x 2
135.6(W) X 13.9(H) X 135.6(D)
150g
42