Receiving In Tad Mode; Receiving In Auto Mode - Samsung FX100 Operator's Manual

T F
HE AX

Receiving in TAD Mode

1
Press RECEIVE repeatedly
until TAD appears in the
LCD.
TAD appears in the LCD
and the RECEIVE indicater
flashes,

Receiving in AUTO Mode

1
Press RECEIVE repeatedly
until AUTO appears in the
LCD.
AUTO appears in the LCD
and the RECEIVE indicator
flashes rapidly.
3.8 T : T F
CHAPTER HREE HE
M
A C H I N E
1 1 - 1 5 1 0 : 3 0 T A D
1 1 - 1 5 1 0 : 3 0 A U T O
M
AX ACHINE
machine answers and records the caller's
message.
If a fax tone is detected on the line by the
fax machine, the call automatically
switches over to the fax machine and
reception begins overriding the
answering machine's announcement.
If you have set your machine to the TAD
mode, and the answering machine is
switched off, or is not connected to your
fax machine, the fax machine will
automatically go into receive mode after
6 rings.
mode, the machine answers the call on
the second ring and starts receiving a fax
when detected fax tone. You can change
this number of rings. For more
information, see page 4.12.
If no fax tone is detected, the machine
gives a secondary ringing tone to advise
you of an incoming call. If you do not
answer the call while ringing, the
machine automatically goes into receive
mode.