Using Chain Dialing - Samsung FX100 Operator's Manual

S F
PECIAL

Using Chain Dialing

When using special services, such as alternate long-distance or bank-by-phone, you must
enter the telephone number of the service and wait for the computer to answer before
continuing. Enter the phone number of the special service first. Then, when the computer
answers, enter the rest of the information, such as a long-distance number. We call this
procedure Chain Dialing. You can combine manual dialing using Number Keypad, Speed
Dialing and/or One-Touch Dialing for Chain Dialing.
1
Pick up the Handset or
press OHD.
The LCD shows the
message "PHONE" .
2
Enter a telephone number.
The LCD shows the
number you entered.
3
When the service answers,
enter the additional
numbers using number
One-Touch
keypad, or
or
button,
Dial number.
The LCD shows the
additional number(s) you
entered.
4.8
C F S F
HAPTER OUR: PECIAL EATURES
EATURES
PHONE
7 3 0 1 2 3 4
2-digit Speed
7 3 0 1 2 3 4 9 8 7 9 5 4 3
To send a document using Chain
Dialing, load a document face down into
the Document Feeder.
If you have pulse-dialing service, be
sure to include a pulse-to-tone mode
change in front of the numbers that you
want to dial after the computer service
answers.
For example, your long-distance
carrier's number, using either Number
Keypad, One-Touch button, or 2-digit
Speed Dial number.
You cannot use redial for Chain Dialing.