Sharpening Of Knives - Westfalia 81 25 05 Original Instructions Manual

Sharpening of Knives

k
l
1. Install the adapter for sharpening knives and scissors (c) on the multi task
sharpener.
2. Use the on/off switch (b) to put the multi task sharpener into operation.
3. Hold the knife by its handle and put the end of the knife's cutting edge into
the notch (k) of the adapter (figure 2a).
4. As soon as the cutting edge touches the grinding disc, start pulling the knife
towards you until it is fully pulled out of the knife notch. Apply slight
pressure against the grinding disc when pulling out the knife (figure 2b).
Operation
The adapter for sharpening knives
and
sharpening all household knives
and scissors with straight blades.
Serrated or wavy blades can not
be processed.
22
scissors is suitable for