Troubleshooting - Hunter Thaden Installation Manual

Fan Doesn't Work
• Make sure power switch is on.
• Check the circuit breaker to ensure the power is
turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen
the canopy and check all the connections according
to the wiring diagram.
Excessive Wobbling
• Make sure the blades are properly installed.
• Turn the power off, support the fan carefully, and
check that the hanger ball is properly seated.
• If wobble persists please contact customer support.
Do not use the Hunter balance kit due to the unique
design of the blades.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so,
replace all of the blades.
Ceiling Bracket Blades
Controlling Your Fan
Ceiling fans work in two directions: downdraft
(counterclockwise rotation) and updraft
(clockwise rotation). To change the direction
of air flow, turn the fan off and let it come to a
complete stop. Slide the reversing switch to the
opposite position. Restart the fan.

Troubleshooting

Remote Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
Multiple Remote Issues
• If you have multiple remotes or multiple remote-
controlled fans installed on the same circuit breaker
and you are experiencing interference or faulty
operation of your remote controls, please go to
www.HunterFan.com/FAQs and click "How do I
properly install multiple remote-controlled fans?" for
information on how to correct this issue.
Downrod Hanging Fan
Reverse
Switch
Wiring Canopy
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
Cap Remote Troubleshooting
1886
10