Advertisement
Taking care of your machine/Let's talk technical
Cleaning the terminals
CAUTION: Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting.
Do not use your vacuum cleaner without the filters in place.
Using a dry cloth or soft dusting brush remove any dust or debris from terminals in vacuum, on handheld
and on docking station.
Clearing blockages
Press the handheld
release button. Lift to
remove the handheld
from the main body.
Cleaning blockage for the brushbar
If the brushbar has been
obstructed, the Motor
Protection Sensor may have
been activated. Remove the
battery and handheld and
clear any obstruction from the
brushbar. Wait 30 minutes for
the vacuum cleaner to reset
itself. Replace the battery and
handheld and retry.
For best performance terminals in vacuum, on handheld
and on docking station must be free from dust and dirt.
Press the floorhead
release button and pull
floorhead to remove.
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
CAUTION
Remove any blockage from the main body.
Advertisement
