Sending A Fax; Loading A Document - Samsung SCX-4521F User Manual

Sending a Fax

Loading a Document

You can use the Automatic Document Feeder (ADF) or the
document glass to load an original document for faxing. Using
the ADF, you can load up to 30 sheets of 20 lb (75 g/m
paper at a time. You can, of course, place only one sheet at a
time on the document glass. For details about preparing a
document, see "Preparing a Document" on page 4.1.
To fax a document using the Automatic
Document Feeder (ADF):
1
Load the document face up into the ADF. You can insert
up to 30 sheets at a time.
Make sure that the bottom of the document stack matches
the paper size marked on the document tray.
2
Adjust the document guide on the ADF to match the width
of the document.
N : Dust on the ADF glass may cause black lines on the
OTE
printout. Keep it always clean.
2
bond)
7.3
Faxing (Only for SCX-4521F)
To fax a document from the document glass:
1
Lift and open the document cover.
2
Place the document face down on the document glass
and align it at the top left corner of the glass.
N
: Make sure that no other documents are in the ADF
OTE
(Automatic Document Feeder). If a document is detected in
the ADF, the machine gives it priority over the document on
the document glass.
3
Close the document cover.