1. Manuals
  2. Brands
  3. Ormesa Manuals
  4. Mobility Aid
  5. Trolli
  6. Use and maintenance handbook

Ormesa Trolli Use And Maintenance Handbook

Seating system for teens and adults
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ADJUSTABLE
seating system for TEENS and ADULTS
with adjustable headrest included

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Trolli and is the answer not in the manual?

Questions and answers

Related Manuals for Ormesa Trolli

Summary of Contents for Ormesa Trolli

  • Page 1 ADJUSTABLE seating system for TEENS and ADULTS with adjustable headrest included...
  • Page 3 If, after reading it, you still have questions, contact your retailer, who will be happy to help you, or call ORMESA directly at +39 0742 22927, send a fax to +39 0742 22637 or send an e-mail to: info@ormesa.com Ormesa Team Pag.

  • Page 4: Table Of Contents

    LABELS AND PLATES ....................10 WARRANTY ........................11 HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE ........11 HOW TO USE TROLLI FOR TRANSPORT ON A MOVING VEHICLE (cars, buses, etc.) ........................12 INITIAL PREPARATION ....................16 DESCRIPTION OF THE MEDICAL DEVICE ..............17 WHAT IT IS COMPOSED OF - TECHNICAL FEATURES ..........
  • Page 5 VEST HARNESS 853 ....................40 4 POINT SHAPED HARNESS 853 SLIM ..............40 SHOPPING BASKET 858 .................... 40 891 TIEDOWN HOOKS (4 RINGS) ................41 HEEL RESTS 960 ......................42 FRONT WHEEL DIRECTION LOCKS 812 ..............43 FOOTRESTS ADJUSTABLE IN TILT 956 ..............44 ADJUSTABLE PUSH HANDLES 951 ................

  • Page 6: General Informations

    NORMATIVE REFERENCES AND SAFETY WARNINGS INTENDED USE, PURPOSE AND FUNCTIONS Adjustable TROLLI is a seating system designed for easy and quick transfers for users affected by diseases, which prevent and limit the walking and for users who need to be easily moved from one place to another thanks to the caregiver.

  • Page 7: Warnings

    • assistants; it provides instructions for its correct use. The manual reflects the technical state of the product at the time it was sold. Ormesa • s.r.l. reserves the right to make any changes to the product or manual suggested by experience, technical considerations or regulatory developments without any obligation to update its previous production and relevant manuals.

  • Page 8: What You Should Not Do With Trolli

    WHAT YOU SHOULD NOT DO WITH TROLLI DO NOT USE THE PRODUCT WITH PEOPLE LARGER OR SMALLER THAN THE DIMENSIONS SHOWN ON PAGE 13 DO NOT ALLOW CHILDREN TO USE THE AID OR EVEN PLAY WITH IT DO NOT ALLOW ANYONE TO STAND ON THE FOOTRESTS OR THE BACK...
  • Page 9 TROLLI IS A MECHANICAL MEDICAL DEVICE: Perform REGULAR MAINTENANCE and CLEANING following the instructions shown in the "Maintenance" chapter on page 47-48-49-50-51-52 and HAVE THE DEVICE INSPECTED AT THE INTERVALS INDICATED to VERIFY that it is WORKING PROPERLY and in GOOD CONDITION,...

  • Page 10: Braking The Device

    BRAKING THE DEVICE BEWARE! BEFORE POSITIONING OR REMOVING THE USER FROM THE TROLLI AND BEFORE ANY ADJUSTMENT OF THE DETAILS, IT IS NECESSARY TO BRAKE THE SEAT SYSTEM LOCK Locking lever parking brake UNLOCK Pag. 8 / 53...

  • Page 11: How To Tilt Trolli To Overcome Obstacles

    HOW TO TILT TROLLI TO OVERCOME OBSTACLES the two OVERCOMING STEP BARS, behind the rear wheels, greatly facilitate this operation CLIMB FACING FORWARD DESCEND FACING BACKWARD OVERCOMING STEP BAR Pag. 9 / 53...

  • Page 12: Labels And Plates

    THE CE MARKING CERTIFIES THAT TROLLI CONFORMS SAFETY REQUIREMENTS defined with the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017 applicable for MEDICAL DEVICE SECUREMENT POINT TO FOR THE ANCHORAGE OF THE ISO 10542-2 APPROVED 4-...

  • Page 13: Warranty

    WARRANTY ORMESA guarantees the product for 2 years ; in case of problems, contact the retailer where you purchased it. Always ask for original spare parts, otherwise the guarantee will decline ORMESA will not be liable for damage in the following cases: - use by an unsuitable person;...

  • Page 14: How To Use Trolli For Transport On A Moving Vehicle (Cars, Buses, Etc.)

    HOW TO USE TROLLI FOR TRANSPORT ON A MOVING VEHICLE (cars, buses, etc.) TROLLI conforms to the ISO 7176-19 and ANSI RESNA WC/19 standard, which defines the safety requirements for transport, facing in the direction of travel, on moving approved vehicles (cars, buses, etc.) with the following...
  • Page 15 WITHOUT THE WRITTEN AUTHORIZATION OF ORMESA SRL, IS FORBIDDEN AND WILL VOID THE MARK AND THE WARRANTY TROLLI SEATING SYSTEM IS APPROVED FOR CARRIAGE IN A MOVING VEHICLE FOR A USER WITH MAXIMUM WEIGHT OF 75 KG (165 LB) Pag. 13 / 53...
  • Page 16 Anchor belt hook compatible with 891 anchors SEE PAGE 37 FOR ASSEMBLY INSTRUCTIONS FOR ADDITIONAL COMPONENT 891 TROLLI SEATING SYSTEM IS APPROVED FOR CARRIAGE IN A MOVING VEHICLE FOR A USER WITH MAXIMUM WIGHT OF 75 KG. Pag. 14 / 53...
  • Page 17 30° to 75° to the horizontal, similar to that shown in Figure 1. A steeper (greater) angle within the preferred zone is desirable ATTENTION! TROLLI postural belts are not approved for use as restraint systems. Fig. 1...

  • Page 18: Initial Preparation

    19,2 20137 40,5 26,3 19,2 20137 45,1 HOW TO REMOVE TROLLI FROM THE BOX CAUTION! CUT WITHOUT PRESSING TOO HARD WITH THE BLADE SO AS NOT TO DAMAGE THE CONTENTS OF THE BOX REMOVE FROM THE Pag. 16 / 53...

  • Page 19: Description Of The Medical Device

    DESCRIPTION OF THE MEDICAL DEVICE WHAT IT IS COMPOSED OF - TECHNICAL FEATURES Lightweight umbrella folding FRAME, in SUPPORTING UPHOLSTERY extremely aluminum painted with non-toxic epoxy breathable, fireproof according to EN 1021-1: powders. 2014 and EN 1021-2: 2014 standards, resistant and easily washable (although not removable) HEADREST, adjustable in height, tilt and backward-forwards.

  • Page 20: Dimensional Features

    MEASURES Measures in cm and inches • Height of the user 130-175 cm (51,2”-68,9”) weight in kg and pounds 80 cm (31,5”) 107 cm (42,2”) WEIGHT OF THE AID LOAD 36-32-28* cm 39 cm 59 cm 36-46 cm 46-56 cm 42 cm 94 cm 14,8 kg...

  • Page 21: How Trolli Works And How To Use It

    HOW TROLLI WORKS AND HOW TO USE IT (video at the product page of the website www.ormesa.com) OPENING THE DEVICE PULL FORWARD THE LEGREST AND CONTEMPORARELY TURN IT UPWARDS RAISE THE DEVICE TO A VERTICAL POSITION OPEN THE DEVICE BY PUSHING WITH ONE HAND ON THE HANDLE AND OTHER ON THE ARM Pag.
  • Page 22 4. 5. PUSH BOTH ARMS DOWN. WHEN IT CLICKS, THE FRAME IS LOCKED OPEN THE HEADREST CLOCK CLOCK BEWARE! BE SURE THAT THE FRAME IS WELL LOCKED Pag. 20 / 53...

  • Page 23: Opening The Footrests And Inserting Of The Legrest Band

    OPENING THE FOOTRESTS and INSERTING of the LEGREST BAND OWER BOTH FOOTRESTS INSERT THE LEGREST BAND IN THE PROPER LOOPS Pag. 21 / 53...

  • Page 24: Closing The Footrests

    CLOSING THE FOOTRESTS 1. REMOVE THE LEG SUPPORT BAND 2. TIP BOTH FOOTRESTS UP 3. PULL UP ON THE LEG SUPPORT 4. AND, AT THE SAME TIME TURN THE LEG SUPPORT TOWARDS THE BACK Pag. 22 / 53...

  • Page 25: Inversion Of The Footrests

    INVERSION OF THE FOOTRESTS 1. UNSCREW THE SCREW 2. REVERSE THE FOOTRESTS 3. TIGHTEN THE SCREW SUPPLIED WRENCH INVERTED FOOTRESTS Pag. 23 / 53...

  • Page 26: Closing The Device

    CLOSING THE DEVICE (video at the product page of the website www.ormesa.com) BRAKING THE STROLLER (PAG. 8) AND FOLD THE HEADREST (PAG. 28) TIP BOTH FOOTREST UP 2. . 3. PULL UP THE LOCKING LEVER WITH BOTH HANDS, AT THE SAME TIME PULL UP...
  • Page 27 4. PLACE THE STROLLER IN HORIZONTAL POSITION AND PUSH ON THE FRAME UNTIL COMPLETELY CLOSED 5. TIP UP BOTH FOOTRESTS Pag. 25 / 53...

  • Page 28: Adjusting The Footrests In Height

    ADJUSTING THE FOOTRESTS IN HEIGHT 1. UNSCREW NUTS AND REMOVE SCREWS 2. PLACE THE FOOTREST AT THE DESIRED HEIGHT 3. INSERT SCREWS AND TIGHTEN NUTS Pag. 26 / 53...

  • Page 29: Adjusting The Depth Of The Seat

    ADJUSTING THE DEPTH OF THE SEAT 1 LOOSEN THE INDICATED SCREW (on both sides) 2 ADJUST THE HEIGHT OF THE BACKREST 3 TIGHTEN THE SCREW INDICATED (in both sides) Supplied wrench Pag. 27 / 53...

  • Page 30: Adjusting The Tilt Of The Backrest

    ADJUSTING THE TILT OF THE BACKREST PULL THE TILT LEVER UP TILT THE BACKREST (A CLICK SIGNALS THE NEXT POSITION) TILT LEVER BACK VIEW Pag. 28 / 53...

  • Page 31: Adjusting The Headrest

    ADJUSTING THE HEADREST 1 OPEN THE 4 LOCKING LEVERS 2 ADJUSTING THE TILT AND DEPTH OF THE HEADREST AND CLOSED THE 4 LOCKING LEVERS Locking lever BACK VIEW Locking lever Locking lever Lock unlock Pag. 29 / 53...
  • Page 32 1 LOOSEN THE INDICATED SCREWS (on both sides) 2 ADJUST THE HEIGHT OF THE HEADREST 3 TIGHTEN THE SCREWS (on both sides) Supplie wrench Pag. 30 / 53...

  • Page 33: Adjusting The Height Of The Backrest

    ADJUSTING THE HEIGHT OF THE BACKREST 1 LOOSEN THE INDICATED SCREW (on both sides) 2 ADJUST THE HEIGHT OF THE BACKREST 3 TIGHTEN THE SCREW INDICATED (in both sides) BACK VIEW OF THE BACKREST Supplied wrench Pag. 31 / 53...

  • Page 34: Assembling The Additional Components

    ASSEMBLING THE ADDITIONAL COMPONENTS PADDED PELVIC SIDE SUPPORTS 958 (video at the product page of the website www.ormesa.com) ASSEMBLY 1. 2. INSERT THE CURSOR IN THE GUIDE INSERT THE SIDE SUPPORT ON THE CURSOR AND TIGHTEN THE SCREW (by inserting the wrench into the indicated hole)

  • Page 35: Trunk Side Supports 838

    TRUNK SIDE SUPPORTS 838 (video at the product page of the website www.ormesa.com) -INSERTION 1 INSERT THE CURSOR IN THE GUIDE 2 INSERT THE SIDE SUPPORT AND TIGHTEN THE SCREW (by inserting the wrench into the indicated hole) Supplied key...
  • Page 36 -WIDTH AND ROTATION ADJUSTMENT 1 LOOSEN THE INDICATED SCREWS 2 ADJUST THE SIDE SUPPORT IN WIDTH AND TILT 3 TIGHTEN THE SCREWS Supplied wrench Pag. 34 / 51...

  • Page 37: Wrappable And Flexible Trunk Side Supports 868

    WRAPPABLE AND FLEXIBLE TRUNK SUPPORT e in A ASSEMBLY 2. INSERT THE CURSOR IN THE GUIDE 3.INSERT THE SIDE SUPPORT ON THE CURSOR AND TIGHTEN THE SCREW (by inserting the wrench into the indicated hole) Supplied wrench B HEIGHT ADJUSTMENT LOOSEN THE INDICATED SCREW (by inserting the wrench into the indicated hole) ADJUST THE SIDE SUPPORTI IN HEIGHT...
  • Page 38 WIDTH AND TILT ADJUSTMENT 1. LOOSEN THE INDICATED SCREWS 2. ADJUST THE SIDE SUPPORT IN WIDTH AND TILT 3. TIGHTEN THE SCREWS Supplied wrench BACKREST FRONT VIEW Pag. 36 / 53...

  • Page 39: Front Handlebar 839

    FRONT HANDLEBAR 839 Tilt adjustment ASSEMBLY TILT ADJUSTMENT Pag. 37 / 53...

  • Page 40: Abduction Block 834

    ABDUCTION BLOCK 834 Before inserting the Abduction blo it is advisable to close the device slight (fig. 1) CLOCK before using the device (fig. 2) (fig. 1) (fig. 2) Pocket with velcro inside 4-POINT PELVIC BELT 920 Supplied wrench Pag. 38 / 53...

  • Page 41: Pelvic Belt With Variable Angle (From 45° To 90°) 947

    PELVIC BELT WITH VARIABLE ANGLE (from 45° to 90°) 947 Supplied wrench Pag. 39 / 53...

  • Page 42: Vest Harness 853

    VEST HARNESS 853 4 POINT SHAPED HARNESS 853 SLIM SHOPPING BASKET 858 Pag. 40 / 53...

  • Page 43: 891 Tiedown Hooks (4 Rings)

    STROLLER suitable for ISO 10542-approved four-point straps provided in the vehicle. To anchor TROLLI to the transport vehicle, see the instructions on page 14 the child must wear both a lap belt and a diagonal shoulder belt ISO 7176-19- or ISO 10542-approved (i.e., belts with a label of conformity to these ISO standards).

  • Page 44: Heel Rests 960

    HEEL RESTS 960 SCREW THE PIN ON THE FOOT REST BY NSERTING THE SLOT BETWEEN THE TWO WASHERS PLACE THE VELCRO STRAP ON THE FOOT REST HEEL REST MOUNTED SUPPLIED WRENCH VELCRO PLASTIC WASHER SLOT BIG WASHER LITTLE WASHER THE 960 ADDITIONAL COMPONENT CAN ALSO BE ASSEMBLED WITH THE FOOTRESTS INVERTED (see pag.

  • Page 45: Front Wheel Direction Locks 812

    FRONT REMOVE THE FRONT INSERT THE DIRECTION LOCKER IN THE CARRIER SEAT TIGHTEN THE FORK REASSEMBLE THE HEXAGONAL WRENCH OF 6 3 ARANDELAS HEXAGONAL WRENCH OF 8 HEXAGONAL WRENCH OF 6 Pag. 43 / 53...

  • Page 46: Footrests Adjustable In Tilt 956

    FOOTRESTS ADJUSTABLE IN TILT 956 A. ASSEMBLY UNSCREW THE SCREW AND REMOVE BOTH SUPPLIED FOOTRESTS REMOVE THE FOOTREST FROM THE INDICATED BAR ASSEMBLE THE 956 COMPONENT (BAR AND JOINT) ON THE FOOTREST REASSEMBLY THE FOOTREST ON THE AID Supplied wrench Supplied wrench Supplied...

  • Page 47: Adjustable Push Handles 951

    LOOSEN THE SCREWS POSITION BOTH HANDLES AT THE DESIRED HEIGHT TIGHTEN THE SCREWS Height Range: 7 cm Height of Trolli 94 cm (37”) pag. 13 Height of Trollino with 951 max. 101 cm (39,7”) Supplied wrench Pag. 45 / 53...

  • Page 48: Padded Side Protection Covers 844

    PADDED SIDE PROTECTION COVERS Closable with zip around the frame and can be attached on the backrest with buttons Pag. 46 / 53...

  • Page 49: Cleaning, Disinfection, Sanitization

    CLEANING, DISINFECTION, SANITIZATION INFORMATION SANIFICATION is the complex of cleaning and / or disinfection procedures and operations The CLEANING is a physical and mechanical process (i.e., rubbing) with which a large part of potential pathogenic microorganisms (bacteria, fungus, or virus), further to the visible dirt, is removed from the surface.

  • Page 50: Procedure

    PROCEDURE Activities Cadence Description 4.1 CLEANING and daily or weekly Soak a sponge or a clean disposable CLEANSING based on intensity of use cloth (colorless and non-abrasive) with and biological risk (patient neutral detergent previously diluted in with particular sweating, warm water (max.
  • Page 51 4.4 SANITIZATION Based on use The percarbonate is a natural product WITH of mineral origin that is commercially PERCARBONATE available; when dissolved in water, it releases active oxygen already at 30 ° with disinfectant, antibiotic and antibacterial action. For a sanitizing action during the cleaning of the frame and the washing of the harness and removable upholsteries, you can...

  • Page 52: Maintenance

    MAINTENANCE The execution of all maintenance operations is necessary to maintain the correct functionality and safety of the medical device. ORDINARY MAINTENANCE (monthly) Carry out the checks and periodic maintenance operations as indicated below. Maintenance and replacement of parts or additional components must be carried out without the user sitting in the stroller Intensify all checks in marine environments, clean more often, anoint the parts exposed to salt corrosion (such as chrome, bolts and screws).

  • Page 53: Preventive Maintenance (Biennial)

    § check the smooth operation of the MOVING ADJUSTMENT AND PARTS and keep them clean from dust and OPENING/CLOSING dirt in order to avoid friction that could MECHANISMS compromise correct functioning. If unsuccessful, lubricate them with commercial silicone dry oil following the instructions on the container label.

  • Page 54: Extraordinary Maintenance (Or Corrective)

    (mentioned above). Extraordinary maintenance must be carried out by the Dealer who supplied the product or by another subject indicated by the Manufacturer or the Distributor of the ORMESA products in the country of destination. The interventions must be performed with ORIGINAL REPLACEMENTS PARTS of the...

  • Page 55: Conditions For Durability, Reuse And Reassignment To Anew User

    Quality Management System certificated in 1998 according to ISO 13485, there is adequate confidence that the average lifespan of TROLLI is about 5 years, on condition that it is used according to the directions given in the user manual.
  • Page 56 Ormesa srl Via delle Industrie, 6 - Z.I. Sant’Eraclio - 06034 FOLIGNO (PG) ITALY P.I. IT 00574020541 CCIAA Perugia 119215 Iscr. Trib. Perugia 11907 Tel. + 39 0742 22927 Fax +39 0742 22637 info@ormesa.com www.ormesa.com SINCE 1980 CRASH TEST...

Table of Contents