Table of Contents
Advertisement
7.5
CONTROL PANEL INSTALLATION MANUAL.
Safety precautions.
- Read the safety precautions carefully before installing the unit.
- It is recommended to strictly abide by the important safety tips given below.
- Make sure that nothing anomalous occurs during execution of the test and completion of installation, then deliver the manual to the
user.
- Meaning of symbols:
Indicates that improper use could cause death or serious injury.
Indicates that improper use could cause irreparable damage to the appliance or personal injury.
• Have the unit installed by qualified technicians. Unqualified personnel might perform a
non-professional installation, with the risk of electric shocks or fire.
• Strictly follow the instructions in this manual. Incorrect installation could cause electric
shocks or fire.
• Re-installation must be carried out by qualified technicians. Incorrect installation could
cause electric shocks or fire.
• Do not take it upon yourself to disassemble the unit. Incorrect disassembly could cause mal-
functioning or overheating with the resulting risk of fire.
- Do not install the unit in a place where flammable gas leaks could occur. A flammable gas leak near the control panel could
burst into a fire.
- Wiring must be adequate to the current intensity of the control panel. Otherwise an electric dispersion could occur with con-
sequent risk of fire.
- Use the cables indicated in the wiring diagram. Do not apply any external force to the terminal. Otherwise the wires could
break, heat up and cause a fire.
Other precautions.
• Place of installation.
Do not install the unit in places where there are large amounts of oil, vapour, sulphurous gases.
Otherwise the appliance could deform and become unusable.
• Preparation prior to installation.
1. Check that the following components are all present:
No.
1
Control panel
2
Self-tapping round Philips head screw
3
Round Philips head screw
4
Use and installation manual
5
Plastic spacer
6
Plastic plug
Name
Qty
1
-
3
For wall-mounting
2
For mounting on electric switchgear
1
-
This accessory is used to install the control panel inside the
2
electric cabinet
3
For wall-mounting
Notes
25
Advertisement
Table of Contents
