VERS.2015.05.19
1
BASIC SAFETY INSTRUCTIONS
The core drill rig CDR 353 is exclusively designed for the drilling of construction products
mainly within a Construction Site.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any
risk shall be borne entirely by the user. Observing the operating instructions and compliance
with inspection and servicing requirements shall also be considered as included under use in
accordance with the regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The
following symbols are used on the machine:
Read operator's instructions
Hand protection must be worn
6
Airway protection must be worn
Kit CDR 353 + NBM 351_MAN_EN
Ear protection must be worn
Eye protection shall be worn