CONNECTING THE REMOTE CONTROLLER
To control the camera, a remote controller should be connected to.
1.
Connect the camera's video out port to the CONTROLLER's VIDEO IN.
2.
Connect the CONTROLLER's VIDEO OUT port to a monitor's video in.
❖
You can use the menu as following :
- Press and hold [ENTER]: Moves to the main menu screen.
- Press [ENTER] briefl y: Used to confi rm the current settings.
- Four Direction Keys: Used to move the cursor up/down or left/right.
POWER
STATUS
POWER
ADDRESS
OFF
ON
(X)100
(X)10
(X)1
CABLE
COMPENSATION
S
L
ON
ON
1
2
1
2 3 4 5 6 7 8
TERMINATION
PROTOCOL
REMOTE CONTROLLER SPC-300
<CONTROLLER>
Installation
15