Epson TM-T20II Technical Reference Manual page 49

International character default
Selectable from 18 sets
Initial setting: USA
Interface selection
• UIB
• Ethernet
• Built-in USB
*
• Auto (initial setting)
*
: The interface to which data is transmitted first is selected. Once the interface is selected, the
selection is enabled until the power is turned off or the printer is reset. This setting is valid for
models with UIB and built-in USB.
 Available settings may deffer depending on the model.
 For the model which USB Type B connector is covered with a plate, you need to select
[Built-in USB] in order to use the USB interface.
Power supply unit capacity
Selectable from levels 1 to 3 (Low  High)
Initial setting: level 3
Number of columns
• Standard mode (initial setting)
• 42 column mode
Autocutting after closing cover
• Cuts (initial setting)
• Does not cut
Paper reduction
Extra upper space reduction
• Disabled (initial setting)
• Enabled
Chapter 2 Setup
2
49