Daikin FTN50FV1B Operation Manual page 10

■ To set the clock
1. Press "CLOCK button".
is displayed.
blinks.
2. Press "TIMER setting button"
to set the clock to the present
time.
Holding down "
idly increases or decreases the time dis-
play.
3. Press "CLOCK button".
blinks.
■ Turn the breaker ON
• Turning ON the breaker opens the flap,
then closes it again.
(This is a normal procedure.)
NOTE
■ Tips for saving energy
•
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating)
effect.
•
Clogged air filters cause inefficient operation and waste energy. Clean them once in about every two weeks.
■ Please note
•
The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
•
Use the air conditioner in the following conditions.
Mode Operating conditions
COOL Outdoor temperature: –10 to 46°C
Indoor temperature: 18 to 32°C
Indoor humidity: 80% max.
HEAT Outdoor temperature: –15 to 18°C
Indoor temperature: 14 to 28°C
DRY Outdoor temperature: –10 to 46°C
Indoor temperature: 18 to 32°C
Indoor humidity: 80% max.
•
Operation outside this humidity or temperature range may cause a safety device to disable the system.
" or " " button rap-
If operation is continued out of this range
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
•
A safety device may work to stop the operation.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
Recommended temperature setting
For cooling: 26°C – 28°C
For heating: 20°C – 24°C
2
1, 3
9