Contents Contents Machine Overview General Safety Information Getting Started How To Use Looking After Your Machine — Filters and Dirt Container Looking After Your Machine — Filters Looking After Your Machine — Removing Blockages Looking After Your Machine — Brushbar FAQs Other Information Guarantee...
Fur & Fluff tool (available with U87-ZM-PF) 3-in-1 crevice, dust and upholstery tool TurboTool (available with U87-ZM-P, U87-ZM-PF, U87-ZM-R) Pre-motor filter Post-motor filter NOTE: Some parts may vary according to model. Please check inside flap of box for more details. vax.co.uk...
The appliance should only be used as described in the quick start guide or in the full online user guide. Only Vax recommended attachments should be used with this appliance. Do not use this vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water.
2. Snap TurboTool into 2. Store the extension tube position. in to the handle then Insert the handle at the top of the product. Plug in and switch on your machine. vax.co.uk...
How To Use NOTE: Please select the hard floor setting on the brushbar height adjustment dial when using on hard floor, vinyl or lino to ensure the brushbar is in the highest position to avoid damaging your floor. NOTE: This unit has a constantly rotating brushbar. The Height Adjust dial must be set to the highest mode before using the hose and attaching accessories.
NOTE: Wash filters with warm water (40°C max) at least every 3 months for best cleaning results. For detailed information on maintaining your vacuum cleaner and its filters, please refer to the full user guide at vax.co.uk/support Emptying and cleaning the dirt container...
Looking After Your Machine – Filters Cleaning the shroud 40˚C 24hr Remove the pre-motor filter Tap the shroud over a bin Wash the shroud under Turn the dirt container to allow access to the shroud. to release dirt. running water and leave to lid anti-clockwise dry.
Removing debris from the brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar. Removing blockages from the TurboTool vax.co.uk...
Looking After Your Machine – Brushbar Changing the belt Switch off your vacuum Remove the 9 screws from Remove the floorhead cover. Lift the brushbar from the cleaner at the main socket the base of the floorhead machine to remove the belt. and unplug.
Clean the filters. Allow the unit to cool for approximately 1 hour (if you have cleaned the filters you will need to wait 24 hours for the filters to dry before putting them back in the machine) What do I do if the unit becomes damaged or broken? • We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk vax.co.uk...
UK Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please have your machine with you when calling. Vax Careline:...
9:00am-5:00pm we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK vax.co.uk...
Need help?
Do you have a question about the Zoom U87-ZM-B and is the answer not in the manual?
Questions and answers