Plug & Play Feature - Samsung SP-43L2HX Owner's Instructions Manual

ENG
Plug & Play
Language
English
Ь А
Hrvatski
Čeština
Netherland
Français
Sel.
Antenna input check
Country
Austria
Belgium
Croatia
Denmark
Finland
France
Sel.
Country Austria
1%
57 MHz
œ œ √ √ Sel.
Enjoy viewing your new TV.
Plug & Play Feature
Store
Store
ATM
P0 -----
Exit Start
14
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in Standby mode, press the Power button ( ) on
the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
2
Select the appropriate language by moving the joystick up or
down.
3
Press the joystick button (
Result: The message Antenna input check is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the joystick button (
Result: The Country menu is displayed.
5
Select your country by moving the joystick up or down.
6
Press the joystick button (
Result: The ATM menu is displayed.
7
To start the search, press the joystick button (
Result: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the Source (
8
When it has finished, the message Enjoy viewing your new TV
is displayed, and then the channel which has been stored will be
activated.
) to confirm your choice.
).
) to confirm your choice.
).
) button.