Adjusting The Picture Settings (Pc Or Dvi Mode) - Samsung SP-43L2HX Owner's Instructions Manual

ENG
Mode
Adjust
Colour Tone
Colour Adjust
Move
Adjust (Custom)
Contrast
Brightness
œ œ √ √ Adjust
Move
Mode
Adjust
Colour Tone
Colour Adjust
Move
Mode
Adjust
Colour Tone
Colour Adjust
Move
Colour Adjust (Custom)
Red
Green
Blue
œ œ √ √ Adjust
Move
Adjusting the Picture Settings
Picture
Custom
√ √
Custom
√ √
√ √ Enter
75
60
Store
Picture
Custom
√ √
Custom
√ √
œ œ √ √ Sel.
Picture
Custom
√ √
Custom
√ √
√ √ Enter
50
50
50
Store
24
(PC or DVI Mode)
Preset to the PC mode by using the Source button.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
2
Move the joystick right.
3
Move the joystick up or down until the Adjust option is selected.
Move the joystick right.
Result: The Adjust menu is displayed.
4
Move the joystick up or down to select the option (Contrast,
Brightness ) to be adjusted. Move the joystick left or right.
Result: The horizontal bar is displayed. Move the horizontal
bar's cursor left or right by moving the joystick left or
right.
5
Press the MENU button.
Result: The options available in the Picture group are
displayed again.
6
Move the joystick up or down until the Colour Tone option is
selected.
7
Select the option by moving the joystick left or right. The colour
tones are displayed in the following order.
Custom - Colour1 - Colour2 - Colour3
8
Move the joystick up or down until the colour Adjust option is
selected. Move the joystick right.
Result: The Colour Adjust menu is displayed.
9
Move the joystick up or down to select the option (Red, Green,
Blue) to be adjusted. Move the joystick left or right.
Result: The horizontal bar is displayed. Move the horizontal
bar's cursor left or right by moving the joystick left or
right.
10
When you are satisfied with the settings, press the joystick button
( ) to store them.