The contents of this guide may be updated or revised due to product development. The information in this guide is subject to change without notice. The latest version of this document and the manual for installation, commissioning, configuration and decommissioning are to be found in PDF format at www.solplanet.net. SAFETY 2.1 Intended use The product is a battery system for residential and works with the solar hybrid invert- ers.
Page 4
laws, regulations or standards that apply to the installation, electrical safety and use of the product. 2.2 Important safety instructions The product has been designed and tested in accordance with international safety requirements. To prevent personal injury and property damage and to ensure long-term operation of theproduct, read this section carefully and observe all safety information at all times.
Page 5
! WARNING Risk of injury due to weight of product! Injuries may result if the product is lifted incorrectly or dropped while being trans- ported or mounted. • Lift and transport the product carefully. • Wear suitable personal protective equipment, in accordance with local regula- tions, when working on the product.
Page 6
2.3 Symbols on the label Beware of a danger zone! This symbol indicates that the product must be additionally grounded if additional grounding or equipotential bonding is required at the installation site. Beware of high voltage and operating current! The product operates at a high voltage and current. Work on the product must only be carried out by skilled and authorized personnel.
AISWEI New Energy Technology (Yangzhong) Co., Ltd. confirms herewith that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the above mentioned directives. The entire EU Declaration of Conformity can be found at www.solplanet.net. QG0048_Ai-HB 050-200A_EN_540-300266-02_V03_0523...
Page 9
OVERVIEW Object Description Battery control unit(BCU) Battery Module LED指示灯 指示逆变器当前的工作状态 Base LED indicator Circuit breaker Link port out Link port in On/Off Grounding QG0048_Ai-HB 050-200A_EN_540-300266-02_V03_0523...
Page 16
The following information is needed to provide necessary assistance: ——Battery model ——Battery control unit and module series number ——Fault code ——Installation location EMEA Service email: service.EMEA@solplanet.net APAC Service email: service.APAC@solplanet.net LATAM Service email: service.LATAM@solplanet.net Aiswei Greater China Service email: service.china@aiswei-tech.com...
Need help?
Do you have a question about the Ai-HB G2 Series and is the answer not in the manual?
Questions and answers