Page 2
Table of Contents Included Parts ..................3 Tools Required ..................8 Glass side panel assembly ................ 9 Glass door panel assembly ..............11...
Included Parts Description Qty Ref Description Description ① Handle ⑨ Glass Fixing Piece ⑰ Glass Side Panel ② Door Rollers ⑩ Glass Fixing Piece ⑱ Bottom Door Seal Support Bar ③ ⑪ Screws ⑲ Supporting Bar Brackets Support Bar ④ Wall Plugs ⑫...
Tools Required Two people required. We recommend that a technically competent installer should undertake this installation. Be sure you have all included parts and tools required before beginning installation and that you have plenty of space for assembly. PRE-INSTALLATION AND TECHNICAL REQUIREMENTS •...
Glass side panel assembly 1. Attach seals to the end of the side panels where it will touch the wall. 2. Attach all four brackets to the same ends of the side panels. 3. Carefully and individually lift the side panels into place, marking on the wall where holes will be drilled to attach the brackets.
Page 10
6. Attach the seal to side panel. 7. Carefully lift the side panel into place and attach the brackets.
Glass door panel assembly 8. Screw the support bar end plate into place. 9. Lift the support bar into place, attaching it to all three side panels. 10. Slide seals onto the glass door and attach the rollers.
Page 12
11. Mark where the glass fixing piece will be placed. 12. Drill hole and insert plug. 13. Attach the handles to the glass door. 14. Slide glass fixing piece into place.
Page 13
15. Mark where the hole for the glass fixing piece will need to be drilled. 16. Drill hole and insert plug. 17. Screw the fixing piece into place. 18. Adjust and tighten the glass door rollers if needed. 19. Attach the anti-jump rollers.
Page 14
20. Attach caps on the inside of all brackets to protect against water.
Need help?
Do you have a question about the Ravenna 17-2nd U Shape and is the answer not in the manual?
Questions and answers