Table of Contents
Advertisement
Chapter 2 Convenient Features
(2) Memory Configuration submenu
From the Advanced menu, select Memory Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
to show its submenus.
For details about the options, see the table below.
Memory Information
Hardware Memory Test
Memory Retest
Memory Frequency Limit
Memory Voltage
NUMA
Memory RAS Mode
Patrol Scrub
Demand Scrub
66
on the left, move the cursor to it and then press the <Enter> key
Option
[Disabled]
Enabled
[No]
Yes
[Auto]
800 MHz
1066 MHz
1333 MHz
1600 MHz
1866 MHz
1.5 V
[1.35 V]
Disabled
[Enabled]
[Independent]
Mirroring
Lock Step
Sparing
[Enabled]
Disabled
[Enabled]
Express5800/R120e-1M, R120e-2M Maintenance Guide
Parameter
−
Enable or disable to execute memory test
during POST.
If a memory error is detected while this option
is set to Enabled, the relevant memory
resource is degraded.
When this option is set to Yes, error
information on memory is cleared, and all
DIMMs are reconfigured at the next startup.
No is automatically selected after DIMMs are
reconfigured.
Specify the upper limit of operating frequency
of memory. The operating frequency may be
lowered than the specified value depending on
memory configuration.
Specify the operating voltage of memory. The
memory voltage may differ from that specified
in this parameter depending on memory
configuration.
Enable or disable Non-Uniform Memory
Access feature. This option is displayed only
in multi-processor configuration..
Specify the memory RAS mode.
Enable only memory RAS feature (Patrol
Scrubbing).
Enable or disable memory RAS feature
(Demand Scrubbing).
1. System BIOS
Descriptions
−
[
]: Factory setting
Advertisement
Table of Contents
