Server - NEC Express5800/R120e-1M Instruction Manual

Chapter 2 Convenient Features
1.2.4

Server

If you move the cursor to Server, the Server menu screen appears. For the menu that has
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
System Management
Power Control Configuration
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring Policy
82
Option
Disabled
[Enabled]
Disabled
[Enabled]
[Retry 3 Times]
Disable FRB2 Timer
Always Reset
[Disabled]
5-60 minutes
[Retry 3 times]
Always Reset
Express5800/R120e-1M, R120e-2M Maintenance Guide
Parameter
−
−
Enable or disable feature to detect PCI
PERR.
Enable or disable feature to detect PCI
SERR.
Specify how the system should operate if
FRB level 2 errors occur.
Enable or disable the boot monitoring feature
and specify the timeout period.
To use this feature, NEC ESMPRO Agent
must be installed on OS. If starting up an OS
on which it is not installed, disable this
feature
Specify the processing to be done when
time-out was enforced during boot monitoring
and the server was automatically reset.
Retry 3 times: Attempts to boot OS up to
three times.
Always Reset: Retries booting the OS
repeatedly.
This option can be selected only when Boot
Monitoring has been enabled.
1. System BIOS
on the left,
(1/2)
Descriptions
−
−