Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Farmet SOFTER 4,5 PS
Summary of Contents for Farmet SOFTER 4,5 PS
- Page 1 OPERATING MANUAL SOFTER 4,5 PS SOFTER 6 PS Edition: 6 | effective from: 1. 1. 2017 IČ: Farmet a. s. telefon: +420 491 450 111 46504931 web: www.farmet.cz Jiřinková 276 DIČ: CZ46504931 fax: +420 491 450 136 e-mail: farmet@farmet.cz 552 03 Česká Skalice, CZ...
- Page 2 SOFTER 4,5 PS | 6 PS Dear customer, Semi-carried discs plough-harrow SOFTER are quality products of Farmet a.s. Ceska Skalice. You can fully utilise the advantages of your machine after thoroughly studying the operating manual. The serial number of the machine is punched on the production label and written in the operating manual (see Table 1).
-
Page 3: Table Of Contents
Manual SOFTER 4,5 PS | 6 PS TABLE OF CONTENTS MACHINE LIMIT PARAMETERS ..................4 Technical parameters ......................4 Safety statement ........................4 GENERAL INSTRUCTIONS FOR USE ............... 5 Protective tools ........................5 MACHINE TRANSPORT USING TRANSPORT MEANS ......... 6 MACHINE HANDLING USING LIFTING EQUIPMENT .......... -
Page 4: Machine Limit Parameters
Manual SOFTER 4,5 PS | 6 PS MACHINE LIMIT PARAMETERS The machine is designed for soil ploughing up to a depth of 12 cm (4.7 in) when agricultural soil cultivation. Another type of use exceeding the determined purpose is forbidden. -
Page 5: General Instructions For Use
Manual SOFTER 4,5 PS | 6 PS GENERAL INSTRUCTIONS FOR USE The machine is made in accordance with the latest equipment state and approved safety regulations. However, dangers of user or third person injury or machine damage or creation of other material damage may arise during use. -
Page 6: Machine Transport Using Transport Means
Manual SOFTER 4,5 PS | 6 PS MACHINE TRANSPORT USING TRANSPORT MEANS The transport means designed for machine transport must have the load capacity minimally identical with the weight of the transported machine. The total weight of the machine is stated on the production label. - Page 7 Manual SOFTER 4,5 PS | 6 PS When folding and unfolding the side P 50 H frames, stay outside their reach. Stay outside the reach of the tractor - P 6 H agricultural machine set, if the tractor engine is in operation.
- Page 8 Manual SOFTER 4,5 PS | 6 PS Fig. 1 - Location of safety labels on the SOFTER machine P20H P50H P39H P53H P100H P52H P13H P39H P101H P53H P20H P50H P37H P37H P53H P53H P37H P53H P37H P53H 8 │ 26...
-
Page 9: Description
SOFTER 4,5 PS | 6 PS 1. DESCRIPTION The SOFTER 4,5 PS a 6 PS machine is constructed as semi-carried. The basic version consists of a drawbar equipped with a three-point suspension rod, or a loop for the fixed suspension pin, a central frame with the transportation axle and two side frames. -
Page 10: Machine Assembly At The Customer
Manual SOFTER 4,5 PS | 6 PS Fig. 4 – Hydraulic diagram of the machine with a drawbar in the bottom fixed suspension Control distributor (tractor) Hydraulic coupling Closing cock Hydraulic cylinder (central roller) Hydraulic cylinder (side rollers) Hydraulic cylinder (folding side frames) -
Page 11: Commissioning
Manual SOFTER 4,5 PS | 6 PS 3. COMMISSIONING Before taking over the machine, test and check, whether damage occurred during transport and whether all parts contained in the bill of delivery were supplied. Before commissioning the machine, carefully read this operating manual, especially Chapters A-D p. 4-8. -
Page 12: Hydraulics Connection
Manual SOFTER 4,5 PS | 6 PS Tabl.4 – The table of requirements for the towing means for work with the machine: SOFTER 4,5 PS Requirement for the tractor engine power for disc plough-harrow 120-150 kW (160-200 HP) SOFTER 6 PS... -
Page 13: Folding And Unfolding Of The Machine
Manual SOFTER 4,5 PS | 6 PS Fig. 5 – Hydraulic Circuits RED DUST CAPS – control of side frames folding 1 TAPE – folding side frames into the transport position 1 TAPE 2 TAPES – unfolding side frames into the work position... - Page 14 Manual SOFTER 4,5 PS | 6 PS Fig. 6 – Machine prepared for folding Fig. 7 – Machine prepared for unfolding 14 │ 26...
- Page 15 Manual SOFTER 4,5 PS | 6 PS Tab.5 – Work position of the machine Machine Unfolding Procedure – Work Position Initial condition: Machine lifted on axle, side frames secured by locking drawbar, both ball valves on the drawbar are closed.
- Page 16 Manual SOFTER 4,5 PS | 6 PS Tab.6 – Transport position of the machine Machine Folding Procedure – Transport Position Initial state: Machine is unfolded and recessed, both ball valves on the drawbar are open. Lift the machine on rollers (or rollers and drawbar), i.e.
-
Page 17: Machine Transport On Roads
Manual SOFTER 4,5 PS | 6 PS 4. MACHINE TRANSPORT ON ROADS SOFTER 4,5 PS a 6 PS Transport Position of Connect the machine by suspending on the tractor using the two-point suspension equipment (TPS 3), or the fixed bottom suspension using a pin or a ball. -
Page 18: Machine Working Depth Adjustment
Manual SOFTER 4,5 PS | 6 PS MACHINE WORKING DEPTH ADJUSTMENT Setting of soil processing depth is executed on lifted machine through adding or removing of distance washers on hydraulic cylinders. Fig.9 – Setting of working depth The same number of washers must be set on all piston rods!!! ... - Page 19 Manual SOFTER 4,5 PS | 6 PS Tabl.7 – Setting of working depth - mm/ins Position of tracing Number of Working wheel washers depth DRAWBAR FOR THE BOTTOM FIXED HITCH If the machine is equipped with a drawbar for the bottom fixed suspension, it is required to set the working depth using the spacing washers also on the piston rods of the drawbar as shown below, see fig.10.
-
Page 20: Adjusting The Longitudinal Plane Of The Machine
Manual SOFTER 4,5 PS | 6 PS Tabl. 8 – Setting the working depth on the drawbar Hitch height h = 500 mm / 20 in Washers same as on rollers + 12 pieces Hitch height h = 550 mm / 22 in... - Page 21 Manual SOFTER 4,5 PS | 6 PS Fig.12 - When the machine turns to the right-hand side, lower the machine in arms, or remove the spacing washers on the drawbar piston rods Fig.13 - When the machine turns to the left-hand side, lift the machine in arms, or remove the spacing washers on the drawbar piston rods 21 │...
-
Page 22: Setting Side Deflectors And Edge Discs
Manual SOFTER 4,5 PS | 6 PS SETTING SIDE DEFLECTORS AND EDGE DISCS According to the type and quantity of plant residues, it is necessary to set the side deflectors. Fig. 14 – Options for side deflector settings ... -
Page 23: Machine Storage
Manual SOFTER 4,5 PS | 6 PS 7. MACHINE STORAGE Long-term machine shutdown: Store the machine under a roof if possible. Store the machine on a flat and solid surface with sufficient load capacity. Clean the machine before storing and conserve so that it is not damaged in any way during storage. Pay special attention to all marked lubrication points and properly lubricate them according to the lubrication plan. -
Page 24: Environmental Protection
This provision does not apply to the replacement of wearable spare parts (see point 11.2.3). 11.2.8 The warranty is conditioned by using the genuine spare parts of the manufacturer. Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, On 5 January 2017, changes reserved 24 │ 26... -
Page 25: Letter Of Guarantee
The warranty is bound to the machine and is not void upon an owner change. The warranty is limited to the disassembly and assembly, possibly replacement or repair of the defective part. The decision, whether to replace or repair the defective part, is up to the contractual workshop of Farmet. VII. -
Page 26: Ce Certificate Of Conformity
CE CERTIFICATE OF CONFORMITY EG-KONFORMITÄTSERKLÄRUNG DÉCLARATION CE DE CONFORMITÉ СЕРТИФИКАТ СООТВЕТСТВИЯ ЕС DEKLARACJA ZGODNOŚCI WE Мы Nous Farmet a.s. Jiřinková 276 552 03 Česká Skalice Czech Republic DIČ: CZ46504931 Tel/Fax: 00420 491 450136 Vydáváme na vlastní zodpovědnost toto prohlášení. Hereby issue, on our responsibility, this Certificate.
Need help?
Do you have a question about the SOFTER 4,5 PS and is the answer not in the manual?
Questions and answers