Maintenance; Defrosting The Appliance; Cleaning The Appliance - Atag BCD75178DF Instructions For Use Manual

Maintenance

Defrosting the appliance

Automatic defrost of the refrigeration compartment
The refrigeration compartment defrosts automatically from time to time.
Defrosting a NoFrost freezer
The NoFrost freezer defrosts automatically. Any frost deposits will then disappear.
Any ice or frost deposits that nevertheless form in the freezer compartment can be caused by unusual
use of the appliance (opening the door too often and too long or poorly sealing door, etc.). The
freezer will then need to be defrosted manually.
Manual defrosting of the NoFrost freezer
WARNING!
Switch off the appliance in the event of extreme ice formation. Remove the food in the freezer
and protect it so that it cannot partially or completely thaw. Clean and dry the interior of the freezer.
Switch on the appliance and adjust the temperature to the required setting before you put the
food back into the freezer.

Cleaning the appliance

WARNING!
Switch off the appliance and remove the plug from the socket before you start cleaning it.
WARNING!
Do not use abrasive cleaning agents, as they can damage the surface.
INFORMATION!
Activate the intensive freezing function 24 hours before you plan to clean the freezer.
• Regularly clean the interior of the appliance with lukewarm water. If so required, add a neutral
cleaning agent or special refrigerator cleaner to the water. Clean all surfaces with a soft cloth.
Wipe the cleaned parts with a cloth with clean water and then dry them thoroughly.
• Do not put parts of the appliance in a dishwasher: this could damage them.
32
1. Simultaneously touch the adjustment key on the right and the
ECO/Child Lock key for a few seconds.
• 'CL' is shown in the display to indicate that the defrost process
has begun.
• The temperature is shown once again in the display when the
defrost process is finished.