Door Compartments; Glass Shelves - Atag BCD75178DF Instructions For Use Manual

Door compartments

Glass shelves

Description of the appliance
To fit the drawer onto the rails, pull the two rails fully out. Place the
drawer on the rails (3). In the front, press the drawer and the rails
towards each other on the right and the left side until you hear a "click"
(4). Press the back of the drawer downwards if necessary (5). Finally,
slide the drawer on the rails fully in (6).
The height of the door compartments is adjustable. Lift the compartment
out of the groove and fit it in the required position. Each compartment
can carry a maximum weight of 5 kg. The bottom door compartment is
suitable for bottles.
The shelves are made from safety glass. To change the height of a
shelf, lift the front of the shelf (1). Take hold of the back and pull the
shelf slightly forwards (2). Move the shelf to a higher or lower position
(3).
To remove a shelf from the refrigerator, lift the front of the shelf (4). Take
hold of the back and pull the shelf out of the appliance (5).
15