HP ProDesk 480 G6 MT Maintenance And Service Manual page 67

Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option Heading
Clear to disable the display panel touch feature. Default is enabled.
Port Options Allows you to hide the following ports from the operating system:
●
●
●
●
●
●
●
●
●
●
●
Restrict USB Devices
Specify the following categories of USB devices to enable:
●
●
●
When some devices are restricted, the system will disable USB ports that do not meet the allowed
criteria. This feature is usually combined with similar policies within the operating system since USB devices
can be moved to different ports. The ports disabled by the BIOS will remain disabled until the system is
restarted.
Option ROM Launch Policy These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is All legacy for non-
Windows configurations. Default is All UEFI for Windows 10.
Configure Option ROM Launch Policy
●
●
●
Power Management Runtime Power Management (enable/disable)
Options
Allows certain operating systems to reduce processor voltage and frequency when the current software load
does not require the full capabilities of the processor. Default is enabled.
Extended Idle Power States (enable/disable)
Allows certain operating systems to decrease the processors power consumption when the processor is idle.
Default is enabled.
S5 Maximum Power Savings (enable/disable)
Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is
removed from the wake up circuitry, the expansion slots, and any management features while in S5. Default
is disabled.
SATA Power Management (enable/disable)
Serial port A
Serial port B
SATA0
SATA1
SATA2
SATA3
SATA5
Front USB ports
Rear USB ports
USB charging port function
Media card reader
Allow all USB devices
Allow only keyboard and mouse
Allow all but storage devices and hubs.
All legacy
All UEFI
All UEFI except video
Computer Setup (F10) Utilities 61