HP ProDesk 480 G6 MT Maintenance And Service Manual page 61

Table 5-1 Computer Setup—Main (continued)
Option Description
●
●
●
●
System IDs Lets you set the following values:
●
●
Replicated Setup Backup current settings to USB device
Saves system configuration to a formatted USB flash media device.
Restore current settings from USB device
Restores system configuration from a USB flash media device.
Save Custom Defaults Saves the current system configuration settings as the custom default set.
Apply Custom Defaults Applies the custom default settings to the computer after rebooting. Does not apply to options in
and Exit the Security menu.
Apply Factory Defaults and Restores the factory system configuration settings to the computer after rebooting. Does not apply to
Exit options in the Security menu.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to current system configuration, exits Computer Setup, and reboots.
Lock BIOS Version
If this option is checked, the system is locked to the current BIOS version and updates are not allowed.
BIOS Update Preferences
Allows the administrator to select the source of network updates (www.hp.com or another network
server) and allows configuration of a periodic check for updates, including policies for:
■ Check for updates and prompt the user to accept or reject the update at that time
Check for updates and install all new versions
■
Check for updates and install only new versions marked important
■
Network Configuration Settings
Update BIOS Using Local Media
Lets you access files on either USB storage or the hard drive. The HP BIOS Update and Recovery
application included in BIOS Softpaqs at www.hp.com will copy the BIOS file to the correct location on
the hard drive or USB device.
Asset Tracking Number
Ownership Tag
Computer Setup (F10) Utilities 55