Making Espresso Coffee - DeLonghi EC950 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Place a container under the filter holder.
Press the
(B6) button. The appliance delivers water
from the filter holder. Repeat this operation 5 times.
Put a jug with cold water under the steam wand (A5) and
do an 'autosteaming' (fig. 6) (see the Autosteaming para-
graph).
Please note: Never operate the machine without water in the
water tank or without the tank.
The appliance has a water levels sensor.
If while brewing the selected beverage, the
light blinks, the water in the water tank is running out. It is pos-
sible to complete the delivery of the selected beverage.
The
(B2) indicator turns on when the water tank is empty.
Fill the water tank with fresh water.
It is normal for there to be water in the space under the tank.
This should therefore be dried regularly with a clean sponge.

3. MAKING ESPRESSO COFFEE

The
and
the machine is heating up (fig. 7).
5
6
(B2) indicator
indicator lights blinks to indicate
When the lights stop blinking and all the indicator lights
on the control panel remain on steadily, the machine is
ready for use.
Place the cup filter (A15) or (A16) in the filter holder (A14)
(fig. 8).
Espresso
2 x Espresso
Fill the cup filter with ground coffee using the measuring
scoop (A18). Make sure that you are using a fine grind, spe-
cific for espresso.
Before filling the coffee filter with ground coffee, make
sure there are no coffee residues left in the filter from the
last time you made coffee.
Tap the filter holder several times to distribute the coffee
evenly in the cup filter.
Distribute the ground coffee evenly and press down firmly
with the tamper (A11). Make sure the coffee is at the rec-
ommended dose level after tamping (fig. 9).
5
7
8
9

Advertisement

Table of Contents
loading

Table of Contents