Overview Of Controls - OHAUS Explorer Instruction Manual

OVERVIEW OF CONTROLS

1
2
3
4
5
No. Designation
1 I
2 Mode button
3 Units button
4 Setup button
5 >O/T< button
6 button
7 button
8 button
9 button
10 Enter/Print button
11 Leveling feet
12 Leveling indicator
6
Function
Power on off button.
Selects standard weighing, percent, parts counting and animal weighing modes.
Selects weighing units.
Selects various submenus: calibration, date, time, readout, GLP data, GLP set, print,
RS232, LFT, function, units, global, custom.
When pressed, sets balance to zero.
When pressed, travels up through submenus.
When pressed, travels down through submenus.
When pressed, travels to the left through menus.
When pressed, travels to the right through menus.
When in menus, selects item on display, otherwise prints data.
Used to level the balance.
Indicates leveling position of the balance (located at rear of balance).
8
9
7
10
7
12
11