Table of Contents
Advertisement
■
■
Operation
Additional Features
■
To combine ON TIMER and GOOD SLEEP OFF TIMER
• A sample setting for combining the 2 timers is shown below.
• "ON" and "OFF" are displayed on the LCD.
NOTE
■
Note on TIMER operation
• Once you set ON/ GOOD SLEEP OFF TIMER, the time setting is kept in the
memory. The memory is cleared when the remote controller batteries are replaced.
In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
GOOD SLEEP Operation
To use GOOD SLEEP OFF TIMER operation.
GOOD SLEEP
Press
o
during COOL operation.
• " °C " blinks for a few seconds.
• The temperature shift value (default: 2) is displayed on the
LCD for a few seconds.
• "(;)", "OFF" and the stop time (default: 2HR.) are displayed on the LCD.
• The GOOD SLEEP lamp lights orange.
Press � while"
• Each pressing of the button changes temperature shift value by 1
temperature shift value between +1
00
1
J"j
while"
Press
• Each pressing of the button changes the time setting.
The time can be set between 1 and 9 hours. 1 hour ... -+ 9 hours--+ OFF
12
°
C" is blinking.
°
C and +5
°
C" is blinking.
1 � 1
�
°
C. Y ou can speci fy a
°
C.
II
Advertisement
Table of Contents
