Table of Contents
Advertisement
Operation
Modes of Operations
■
Default Set Temperature Setting
As per BEE regulation, whenever Air Conditioner will be switched ON
from the remote, the default set temperature will be set as mentioned
in below table:
Mode
Set temperature befor
remote switched OFF
If set temperature < 24
Cool
If set temperature >= 24
Note:
Whenever AC is switched OFF in dry mode and is switched ON from
remote, air conditioner will start in Cool mode and then DRY mode
selection can be done using the MODE button.
NOTE
■
Note on COOL operation
• This air conditioner cools the room by releasing heat in the room outdoors.
Therefore, cooling performance may fall in higher outdoor temperatures.
■
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible.
It automatically controls temperature and airflow rate, so manual adjustment of these
functions is unavailable.
■
Note on FAN operation
• This mode is valid for fan only.
■
Recommended temperature setting
• For cooling: 26-28
8
·c
·c
°
C
Set temperature after
remote switched ON
Default set temperature will be 24
Default set temperature will remain same
as set prior to remote switched OFF.
·c.
Advertisement
Table of Contents
