Comfort Sleep Operation; Powerful Operation - Daikin FTXR50EV1B9 Operation Manual

COMFORT SLEEP Operation

Controlling the room temperature supports comfort sleep and pleasant wake-up.
•
Check that the clock is correct. If not, set the clock to the present time. (page 6.)
•
The present time display disappears when the COMFORT SLEEP operation is set.
1. Press " " during operation.
2. Press " " to set the time to wake up.
3. Press " ".
•
When settings are made while the unit is not running, press "
■ To cancel the comfort sleep operation
4. Press " ".
ATTENTION
•
Make the room temperature comfortable to some extent before sleep.
<Recommended set temperature> COOLING .................. 26°C – 29°C
* Too low set temperature may cause you to get chilled while asleep.
NOTE
■ Note on COMFORT SLEEP operation
•
Can be used for COOLING, DRY COOLING, MOISTURE COOLING, HEATING,
HUMID HEATING and MOISTURE HEATING.
•
Cannot be used with TIMER operation.
■ How to use COMFORT SLEEP operation effectively
•
Starting COMFORT SLEEP operation low-
ers the set temperature by 2°C in 3 hours
and starts raising it by 1°C 1 hour before the
set time, offering V-curve temperature con-
trol. (See the right figure.)
•
Set the airflow direction so that the air from the unit
does not directly blow on the occupants of the room.

POWERFUL Operation

POWERFUL operation quickly maximizes the cooling (heating) effect in any oper-
ation mode.
1. Press " " during operation.
•
POWERFUL operation ends in 20 minutes.
■ To change the airflow direction
•
Temperature, humidity and airflow rate cannot be changed.
■ To cancel POWERFUL operation
2. Press " " again.
•
The operation mode goes back to the previous one. The multi-colored indicator
on the unit also goes back to the previous color.
NOTE
■ Note on POWERFUL operation
•
Can be used for COOLING, DRY COOLING, HEATING, HUMID HEATING and
MOISTURE HEATING. (Cannot be used while the unit is not running.)
Pressing " " during COOLING, DRY COOLING or MOISTURE COOLING
changes the operation mode to POWERFUL COOLING.
Pressing " " during HEATING, HUMID HEATING or MOISTURE HEATING
changes the operation mode to POWERFUL HEATING.
•
The operation noise is slightly louder during POWERFUL operation.
13
blinks.
is displayed.
•
Pressing the button changes the
time in 10 minutes. Holding the
button makes the time change faster.
is displayed.
is displayed.
HEATING ................... 20°C – 25°C
(For 6 hours of sleep)
Set
Set wakeup time Set wakeup time Set wakeup time
ON ON ON
temper-
ature
–1˚C
–2˚C
3hours 3hours 3hours
Sleeping time 0 1
Green
(page 10.)
" to start the operation.
4
Wakeup Wakeup Wakeup
2hours 2hours 2hours 1hour 1hour 1hour
2 3 4 5 6
Red
< >
COMFORT SLEEP
< >
POWERFUL
■English
2
1, 3
1, 2