Using The Vacuum; Cleaning With The Vacuum Accessories - Shark Navigator Owner's Manual

Using the Vacuum
I MPORTANT: To protect your
carpets, the brushroll will only
turn on when you have pulled
the handle back towards you and
released the Floor Power Nozzle.
Power Switch Settings
OFF
Bare Floors /
Tools
Carpets
4 When cleaning carpets:
Your Shark Navigator Upright
® ™
Vacuum can be used to clean bare
E nsure you have pulled the
floors or carpets – with the click of
handle towards you and select
a switch.
the "II" - Brushroll On position
to agitate the carpet fibers for
Stand the vacuum into the upright
deeper cleaning performance.
position.
When cleaning bare floors:
Plug in the vacuum.
S elect the "I" - On position for
1 S tart with the Power Switch in
suction only cleaning to avoid
the "O" - Off position.
scattering dirt while cleaning.
2 P lace your foot on the Floor
5 D ue to the huge suction
Power Nozzle and pull handle
power of this vacuum, it
towards you.
may become necessary to
3 S et the Power Switch to desired
adjust the suction release
cleaning setting.
on the hose. If the vacuum
is difficult to push or pull or
if it is lifting up area rugs,
adjust the suction release by
opening or closing the valve
at the top end of the hose.
6 TOLL FREE: 1-800-798-7398
Suction Release
R elease suction for
easier push and pull
on high pile carpets
and area rugs.
IMPORTANT:
Your Brushroll Indicator Light
will illuminate solid green when
the brushroll is on, or solid red if
there is a blockage. This feature
is designed to protect your
Lifetime Belt that powers your
brushroll. See Checking for
Blockages on page 11.
NOTE: The height of your power
nozzle has been optimized
for easy pushing and superior
cleaning on all floor types, so
there is no need to make any
height adjustments as you
transition to different floor &
carpet types.
Cleaning with the Vacuum Accessories
Extended Reach
Cleaning Kit
Vacuum Accessories
Before cleaning with your Your vacuum comes with a Super
accessories: Stretch Hose and Cleaning Wand.
Use one or the other to attach your
Stand vacuum into upright position.
cleaning accessories.
Secure Super
1 Using the Super Stretch Hose:
Stretch Hose in
the anti-tip hose S tand the vacuum into upright
position.
hook to prevent
tipping.
R emove the hose from the
Select the "I" - On position for Cleaning Wand.
suction only cleaning.
P ush the selected tool into the
hose connector.
D O NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose.
1
5
6
4
3
2
5
6
4
3
2 Using the Cleaning Wand:
S tand the vacuum into upright
position.
R emove the Cleaning Wand
(with hose attached) from the
unit.
P ush the selected tool into the
end of the Cleaning Wand.
3 Pet Hair Power Brush
4 Dusting Brush
5 C revice Tool
6 2 4" Crevice Tool
Extended Reach Cleaning Kit
Includes an extra Cleaning Wand and
extra Super Stretch Hose.
Increases your cleaning
reach to over 27 feet!
To order additional parts and accessories,
go to www.sharkclean.com or call
1-800-798-7398.
www.sharkclean.com 7