Shark Navigator Lift-Away Quick Start Manual

Please make sure to read the enclosed Information Booklet prior to using your unit.
f
e
d
g
c
b
UPRIGHT MODE:
1 Attach floor nozzle (a) into the
bottom of the canister (b).
2 Insert extension wand (c) into
the back of the canister, slide
on the accessory holder (d) and
a
place the on-board tools (e).
3 Insert handle (f) into the top
of the extension wand and
connect the hose (g) to the
back of the canister.
QUICK START GUIDE: VERSATILE CLEANING
Simple steps to get you cleaning with your new
Shark Navigator Lift-Away
®
h
DETACHABLE LIFT-AWAY MODE
FOR ABOVE-FLOORS:
(From upright mode)
1 Press handle release button to
detach handle (or handle with
extension wand).
2 Press red nozzle release button
(h), place foot on nozzle and pull
the canister up.
3 Attach desired tools to clean.
™ vacuum.
= Carpet Cleaning
= Bare /Above Floor
= OFF
BRUSH ROLL ON/OFF:
1 Press the ON/OFF switch at
the top of the canister to the
'I' position to vacuum bare
floors (straight suction only) or
to the 'II' position to engage
the motorized floor brush (for
vacuuming carpets and rugs).
2 Tilt the handle back to activate
motorized brush roll in carpet
cleaning mode.