Shark Navigator Lift-Away Quick Start Manual

Please make sure to read the enclosed Information Booklet prior to using your unit.
f
e
d
g
c
b
a
TOLL FREE: 1-800-798-7398
C ARPET AND BARE FLOOR
CLEANING:
1 Attach floor nozzle (a) into the bottom
of the canister (b).
Insert extension wand (c) into the back
2
of the canister, slide on the accessory
holder (d) and place the on-board tools
(e).
3 Insert handle (f) into the top of the
extension wand and connect the hose
(g) to the back of the canister.
QUICK START GUIDE: ASSEMBLY
Simple steps to get you cleaning with your new
Shark Navigator Lift-Away
® ®
h
PORTABLE LIFT-AWAY ®
P ress handle release button to detach
1
handle (or handle with extension wand).
2 P ress red nozzle release button (h), place
foot on nozzle and pull the canister up.
3 A ttach desired tools to clean.
Professional Vacuum.
®
= Brush Roll ON
= Bare Floor
= OFF
BRUSH ROLL ON/OFF:
Press the ON/OFF switch at the top
1
of the canister to the 'I' position to
vacuum bare floors or to use with
tools (straight suction only) or in Lift-
Away mode or to the 'II' position to
®
engage the motorized floor brush (for
vacuuming carpets and rugs).
2 Press the floor nozzle down with your
foot and tilt the handle back towards
you to engage the brushroll.
sharkclean.com