en
2.2
Personnel qualifications
2.3
Electrical work
2.4
Monitoring devices
28
Installation and operating instructions • Wilo-SiBoost 2.0 Smart 1, Wilo-SiBoost Smart 1, Wilo-Comfort-Vario COR-1...-GE, Wilo-Comfort-
Personal protective equipment: wear safety footwear
Personal protective equipment: Wear protective
gloves
Useful information
•
Personnel have been instructed on locally applicable regula-
tions governing accident prevention.
•
Personnel have read and understood the installation and oper-
ating instructions.
•
Electrical work: qualified electrician
Person with appropriate technical training (according to
EN 50110-1), knowledge and experience who can identify and
prevent electrical hazards.
•
Lifting work: trained specialist for the operation of lifting
devices
Lifting equipment, lifting gear, attachment points
•
Installation/dismantling must be carried out by a qualified tech-
nician who is trained in the use of the necessary tools and fixa-
tion materials.
•
Operation/control: Operating personnel, instructed in the func-
tioning of the complete system
•
Observe applicable local regulations when connecting to the
mains power supply.
•
Comply with the requirements of the local energy supply com-
pany.
•
Have electrical work carried out by a qualified electrician.
•
Earth the device.
•
Carry out the electrical connection according to the instruc-
tions of the switchgear and control device.
•
Train personnel on how to make electrical connections.
•
Train personnel on the options for switching off the device.
•
Disconnect device from the mains and secure it against being
switched on again without authorisation.
•
Replace defective connection cables. Contact customer service.
The following monitoring devices must be provided on-site:
Circuit breaker
•
Design the power and switching characteristics of the circuit
breakers according to the rated current of the connected
product.
•
Observe local regulations.
Vario COR/T-1...-GE • Ed.04/2023-08