Table of Contents
Advertisement
English
1.
Introduction
1.1.
About this document
The language of the original operating instructions is
German. All other languages of these instructions are transla-
tions of the original operating instructions.
This manual is divided into individual sections, which are
listed in the table of contents. Each section has a meaningful
heading which clearly describes its content.
A copy of the EC declaration of conformity is an integral part
of these installation and operating instructions.
If a technical modification is made to the designs named
there without our agreement, this declaration loses its
validity.
1.2.
Personnel qualifications
All personnel who work on or with the hydraulics must be
qualified for such work; electrical work, for example, may only
be carried out by a qualified electrician. All personnel must be
of legal age.
National accident prevention regulations must also be
observed as a basis by the operating and maintenance per-
sonnel.
It must be ensured that personnel have read and understood
the instructions in this operating and maintenance manual; if
necessary, this manual must be ordered from the manufac-
turer in the required language.
The hydraulics is not intended for use by persons (including
children) with limited physical, sensory or mental capacities
or without the relevant experience or knowledge, unless
they are supervised by a person responsible for their safety
and receive instructions from this person on how to use the
hydraulics.
Children must be supervised in order to ensure that they do
not play with the hydraulics.
1.3.
Copyright
This operating and maintenance manual has been copy-
righted by the manufacturer. The operating and maintenance
manual is intended for use by installation, operating and
maintenance personnel. It contains technical regulations and
drawings which may not be reproduced or distributed, nei-
ther completely nor in part, or used for purposes of compe-
tition, or shared with others without the express consent of
the manufacturer. The illustrations used may differ from the
original and are only intended as an exemplary representation
of the hydraulics.
1.4.
Subject to change
The manufacturer reserves the right to make technical mod-
ifications to systems and/or components. This operating and
maintenance manual refers to the hydraulics shown on the
title page.
1.5.
Warranty
In general, the specifications in the current "General Terms
and Conditions" apply to the warranty. You can find these
here: www.wilo.com/legal
Any deviations must be contractually agreed and shall then
be given priority.
12
1.5.1.
General
The manufacturer is obliged to correct any defects found in
the hydraulics it sells, provided that the defects meet one or
more of the following requirements:
•
The quality defects were caused by the materials used or
the way the device was manufactured and/or designed
•
The defects were reported in writing to the manufac-
turer within the agreed warranty period
•
The hydraulics was used only as prescribed
•
All monitoring devices are connected and were tested
before commissioning.
1.5.2.
Warranty period
The duration of the warranty period is stipulated in the "Gen-
eral Terms and Conditions".
Any deviations must be contractually agreed!
1.5.3.
Spare parts, add-ons and modifications
Only genuine spare parts from the manufacturer may be
used for repairs, replacements, add-ons and modifications.
Unauthorised add-ons and modifications or the use of
non-original spare parts can seriously damage the hydrau-
lics and/or injure personnel.
1.5.4.
Maintenance
The prescribed maintenance and inspection work should be
carried out regularly. This work may only be carried out by
qualified, trained and authorised personnel.
1.5.5.
Damage to the product
Damage and malfunctions that endanger safety must be
eliminated immediately and properly by trained personnel.
The hydraulics may only be operated if it is in perfect working
order.
In general, repairs should only be carried out by Wilo cus-
tomer service!
1.5.6.
Exclusion of liability
No warranty claims will be accepted or liability will be
assumed for hydraulics damage if any of the following items
apply:
•
Inadequate configuration by the manufacturer due to
the information provided by the operator or customer
being insufficient and/or incorrect
•
Non-compliance with safety instructions and work
instructions as specified in this operating and mainte-
nance manual
•
Improper use
•
Incorrect storage and transport
•
Improper installation/dismantling
•
Insufficient maintenance
•
Incorrect repairs
•
Inadequate construction site or construction work
•
Chemical, electrochemical and electrical influences
•
Wear
This means the manufacturer's liability also excludes all
liability for personal injury, material damage and/or financial
losses.
2.
Safety
This section lists all the generally applicable safety instruc-
tions and technical information. In addition, all the other
sections contain specific safety instructions and techni-
INTRODUCTION
WILO SE 10/2022 V05 DIN A4
Advertisement
Table of Contents
