Table of Contents
Advertisement
LEARN AND OBEY your company's safety policy regarding mechanical and
electrical equipment.
MOVING OR LIFTING THE MACHINE: Although our equipment is built and
engineered for great ruggedness in operation, care must be taken when moving the
machine along the floor or lifting it. Damage may occur to sheet metal covers,
electrical cabinets, or small brackets if pressure is applied to them when moving the
machine. When lifting the machine, be certain of total machine weight does not
exceed the capability of the lifting equipment.
EQUIPMENT LOCATION: Adequate area for routine maintenance should be
provided in order to open the machine for service. Proper service area clearances also
should allow people who are working on the machine to be clearly visible to others,
thereby reducing the potential safety hazards.
SAFE HOUSEKEEPING: The work area must be kept clean and uncluttered during
periods of operation or maintenance. No hand tools or other metal objects should be
left on or around the machine.
SAFETY GLASSES OR A FACE SHIELD MUST ALWAYS BE WORN
when servicing or operating the machine.
NEVER attempt to operate the machine unless it is fully assembled with all guards
and interlocks in place and functional.
OBSERVE all danger, warning, caution and safety labels on the equipment.
Upon completion of any machine maintenance, be certain ALL SAFETY GUARDS
AND COVERS are securely and properly fastened prior to resuming machine
operation. All fasteners must be in place and properly tightened. ANY
SHORTCUTS MAY RESULT IN INJURY TO PERSONNEL OR DAMAGE
TO EQUIPMENT.
NEVER wear any loose fitting clothes, neckties, or dangling items such as earrings,
belts, or shoestrings. Jewelry, such as wristwatches, bracelets, or rings should
NEVER be worn. Long hair must be tied back or placed in a tight fitting hairnet.
NEVER lean against or rest hands or feet on the equipment when it is in operation or
open for maintenance. NEVER stand on the machine when it is in operation.
ROTATION OF MOTORS: The correct rotating direction for the machine motor is
clearly marked on the machine. Always check for proper rotation of motors. Incorrect
rotation direction can cause severe damage.
ELECTRICAL GROUNDING: All electrical equipment on the machine must be
grounded in accordance to all local codes and Article 250 of the National Electric
Code.
ALWAYS DISCONNECT AND LOCKOUT the main electrical power to the
machine before performing any service.
SAFETY INTERLOCKS MUST NOT BE BYPASSED. The mechanical and
electrical safety interlocks ensure the safety of personnel. They should never be
tampered with or removed for ANY reason. They should be checked frequently by a
qualified mechanic for proper operation.
NEVER modify the machine configuration or any individual component without
written notice from the factory.
TC 120
682.98767.00 • 10/04/2018
12
Advertisement
Table of Contents
