Table of Contents
Advertisement
CONTROL DESCRIPTIONS
MONOBLOCK AMPLIFIER
1
POWER AND STATUS LED'S:
This displays 'Green' if the amplifier has been correctly powered up and 'Red' if any faults are present.
2
BASS BOOST:
This is a variable control to increase the bass boost at 45Hz from 0-+12dB of gain, adjust to suit.
3
PHASE CONTROL:
Adjust the phase control from 0 to 180 degree to adjust the in phase or out of phase subwoofer direction
to the vehicles system.
4
LOW PASS:
Ensure the crossover frequency is set at 100Hz or below. This feature is designed to filter out all mid to
high frequencies that only full range speakers should produce.
Note: Failure to do so could result in speaker damage.
16
16
16
1
2
3
4
9 10 11
NV-AM16001
5
6
7
8
12
13
Advertisement
Table of Contents
