Dodge JOURNEY 2019 User Manual page 187

Hide thumbs Also See for JOURNEY 2019:
Table of Contents

Advertisement

Acquiring Satellites
• The GPS Satellite strength bars indicate the
strength of your satellite reception.
• Acquiring satellite signals can take a few min-
utes. When at least one of the bars is green,
your device has acquired satellite signals. If
no signal is found, the Navigation system still
can operate with internal gyro direction &
location based on data provided by the ve-
hicle.
• Dead Reckoning technology uses the speed
sensors attached to your vehicle's drivetrain,
and a gyroscope, to supplement the existing
GPS data. The combined data provides accu-
rate positioning for your vehicle in tunnels,
indoor parking garages, urban canyons, and
any other area where GPS signals can become
obstructed.
Finding Points Of Interest
• From the main Navigation menu, press
"Where To?" then press "Points of Interest."
• Select a Category, then a subcategory if nec-
essary.
• Select your destination and press "Go."
Finding A Place By Spelling The Name
• From the Main Navigation Menu press "Where
to?" press "Points of Interest" and then press
"Spell Name."
• Enter the name of your destination.
• Press "Done."
• Select your destination and press "Go."
Entering A Destination Address
• From the main Navigation menu, press
"Where To?" then press "Address."
• Follow the on-screen prompts to enter the
address and press "Go."
Searching Near Another Location
• From the main Navigation menu, press
"Where To?" Press a destination and press
"Near."
• Select an option from the available choices.
Setting Or Changing Your Home Location
• Press the "Nav" button on the touchscreen in
the menu bar to access the Navigation system
and the Main Navigation menu.
• Press "Where To?" then press "Go Home."
• You may enter your address directly, use your
current location as your home address, or
choose from recently found locations.
• To edit your Home location (or other saved
locations), press "Where To?" from the Main
Navigation menu, press "Favorites," then
press the location you want to edit. After
selecting a location to edit, press "Press for
More," then "Edit."
Go Home
• A Home location must be saved in the system.
From the Main Navigation menu, press
"Where To?" then press "Go Home."
185

Advertisement

Table of Contents
loading

Table of Contents