Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Flush fitting
The oven can be installed under a work top or in a cooking column. Figure shows the
installation dimensions.
Make sure that surrounding materials are heat resistant. Align the oven centrally with
respect to the side walls of the units surrounding it and fix it in place with the screws and
Allen screws provided.
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply, make sure that:
- The supply voltage corresponds to the specifications on the data plate on the front of the
oven.
-
The mains supply has an efficient earth (ground) connection complying with all
applicable laws and regulations. Correct earthing (grounding) is a legal requirement.
The power cable should never reach a temperature of 50°C and above ambient
temperature at any point along its length.
If a fixed appliance is not provided with a power cable and plug, or some other device
permitting it to be disconnected from the mains electricity supply, with a gap between the
contacts big enough to guarantee class III over voltage protection, then such a device
must be fitted to the power supply in compliance with the regulations governing electrical
installations. The socket or switch must be easily reachable with the oven fully installed.
N.B. The manufacturer de- clines all responsibility for damage or injury if the above
instructions and nor- mal safety precautions are not respected.
9
of
12
Advertisement
Table of Contents
