PROGRAMMING ERRORS
You cannot program in a cooking period which starts earlier than the time displayed on the
clock. If you try to do so, the buzzer sounds and the AUTO symbol flasher. Simply change
the duration or cooking time to correct the error.
CANCELLING A COOKING PROGRAMME
To cancel a cooking programme, simply press the manual key.
REPLACING THE OVEN LIGHT
IMPORTANT:
The oven light must have these precise features:
a) it must be able to resist high temperatures (up to
300°C)
b) power supply: see V/Hz indicated on data plate. c)
power 25W.
d) E 14 connection.
Before proceeding, disconnect the appliance from the
main electricity supply.
1. to prevent damage, place a tea cloth in the oven
2. unscrew the glass cover of the light
3. unscrew the old light bulb and replace it with the new one
4. put back the glass cover and remove the tea cloth
5. connect the appliance to the main electricity
REMOVING THE OVEN DOOR
The oven door can be removed
quickly and easily. To do so, proceed
as follows:
1. Open the door fully.
2. Lift the two levers shown in fig.
3. Close the door as far as the first
stop (caused by the raised levers).
4. Lift the door upwards and outwards
to remove it from its mountings.
To replace fit the door, fit the hinges in their mountings and lower the two levers.
supply
8
of
12