Karaoke Mode; Program Playback - Vitek VT-3498 Manual Instruction

3498.QXD 30.06.2005
USING VIDEO CD WITH PLAYBACK
CONTROL
• When playing VCD 2.0/3.0 discs in PBC
(playback control) mode, the screen shows
the version of VCD disc and the PBC mode
status.
• After several seconds the menu will appear.
• Using number buttons, select the desired
track, and if the number button is up to 10,
you can use number buttons 0-9.
• If the track number is higher than 10, first
press "+10" button, and then one of number
buttons 0-9.
• During playback press RETURN button to
return to the main menu.
• Press NEXT SKIP or PREV SKIP button to play
the disc in the set direction.
"KARAOKE" MODE
1. Connect microphone to MIC jack on the front
panel. Set the MIC Volume control to MIN
position.
2. Turn on the device and start KARAOKE disc
playback.
3. Turn on the microphone.
4. If you hold the microphone too close to the
speakers, the microphone can whistle. To
avoid this, do not hold the microphone close
to the speakers, do not direct it towards the
speakers, also adjust the microphone's vol-
ume level.
5. Adjust the volume level as desired (using
VOLUME controls).
On-screen information
In the playback mode press DISPLAY button
on the remote control. The screen will show in
sequence parts of the information, all infor-
mation and a screen without information.
23:39 Page 19
Press DISPLAY button again to clear the screen.

PROGRAM PLAYBACK

The device can play the disc tracks in the
order programmed by the user.
1. Press PROGRAM button, the programming
menu appears on screen.
2. Use navigation buttons to select the memory
cell. Then, using number buttons, select the
desired Titles/Chapters.
The selected Titles/Chapters are stored in
memory. To cancel an incorrect entry, use
CLEAR button. Press NEXT button to move to
the next page. You can use up to 20 memory
cells.
Note:
There is not need to put 0 before figures
under 10. If the track number is over 10, first
press "+10" button on the remote control,
then the number button with the second
number.
Example:
Track number 3 > Press "3 ".
Track number 12 > Press "+10" button, then
press "2".
Track number 21 > Press "+10" button twice,
then press "1".
19
ENGLISH