Basic Operation Mode - Vitek VT-3498 Manual Instruction

3498.QXD 30.06.2005
ENGLISH
C. Connecting headphones and microphone
1. Connecting headphones.
Headphones (3.5mm diameter) are plugged into the PHONE jack. When the headphones are con-
nected, the speakers are automatically disconnected. To adjust the sound, use the same controls
as in the usual operation mode.
2. Connecting microphone
Connect the microphone (6.5 mm) to MIC jack.
3. Adjust the sound as desired.
Before playing DVD/VCD/CD discs.
English is set as the default menu language of
your device.
To change the menu language, see the "Setting
the Menu Language" section.
All instructions herein are based on English, as
the on-screen menu language.

BASIC OPERATION MODE

Preparation
Turn on your TV and set it to Video mode. Turn on
the stereo system, if your DVD player is connect-
ed via this system.
Basic Playback Mode
1. Press POWER button to turn on the player.
2. Press OPEN button to open the disc tray.
3. Place a disc onto the tray.
Hold the disc by its edges, do not touch its sur-
face. The disc should be placed with the label
side up and within required area.
4. Press PUSH CLOSE button. The tray is automati-
cally closed and the disc playback starts. When
the disc is closed using PUSH CLOSE button, the
player immediately starts playback.
5. When the disc menu appears on the screen, use navigation buttons or number buttons to select
the needed track number, after this press ENTER button to confirm the choice.
6. Adjust the sound volume using the Volume knob on the DVD player or Volume +/- buttons on the
remote control.
23:39 Page 14
14