Page 3
Note: Use a toothpick or pencil to press and hold the OFF button for several seconds.
Page 7
Note: The time-setting mode will stop if the MEMORY (13) / PROGRAM (45) button is not pressed within 10 seconds.
Page 8
Note: If the CD playback time is shorter than the selected period, the music will switch off before the system disconnects. Note: There are a total of 40 volume levels. The volume level shows on the LCD display (19)
Page 9
Note: While searching, the sound will be automatically turned off. The automatic search will find only radio stations with sufficiently strong signals. For radio stations with weak signals, you need to tune it manually. Note: The programming mode stops if the MEMORY (13) / PROGRAM (45) button is not pressed within 10 seconds.It is possible to program up to 10 FM stations and 10 AM stations into memory.
Page 10
Note: If the disc is properly loaded, the LCD display (19) will show the total number of tracks and playback time of the disc. If the disc is lacking or damaged, the LCD display (19) will show the symbol...
Page 11
Note: The program will be automatically erased if you program more than 64 tracks. Note: If the disc is loaded properly, the LCD display (19) will show the total number of tracks and playback time of the disc.
Page 12
If the disc is lacking or damaged, the LCD display (19) will show the NO DISC symbol. Playback of MP3, CD-R/CD-RW depends on the quality of the disc recording. Note: The program will be automatically erased if you program more than 64 tracks.
Page 13
Note: The list of symbols is from A-Z and 0-9...
Page 14
Note: When the winding is finished, press the STOP / EJECT (33) button Note: At the end of the tape, the cassette mechanism will automatically stop while playing or recording. If you press a wrong combination of buttons, this will damage the tape in the cassette player/recorder.
Page 16
IN ORDER TO DELIVER THE BEST QUALITY, THE SPECIFICATION OF THE UNIT MIGHT CHANGE WITHOUT SUBJECT OF NOTICE SERVICE LIFE OF THE UNIT NOT LESS 5 YEARS...