Headphones Jack - Vitek VT-3498 Manual Instruction

3498.QXD 30.06.2005
ENGLISH
• If the tape moves sluggishly, the jams may be
caused by "scars" on the wound tape reel
(can be seen through the central window). In
most cases they can be removed by winding
the tape to another end, and then back.
Another possible cause can be irrecoverable
damage of the tape. Do not use old or worn
out tapes, as this can break the device.
STORAGE OF TAPES
• Do not store your tapes near TV sets or
speakers. The magnetic fields of other
devices can lower the tape sensitivity or even
erase the recording.
• Do not keep tapes, even for a short time, in
hot, damp or dusty places.
RECORDING CAPABILITIES
TAPE PLAYBACK
• Open the cassette deck, by pressing CAS-
SETTE STOP/EJECT button (in some cases
you will have to press CASSETTE
STOP/EJECT button twice, as it also per-
forms combined functions).
• Insert the tape, with open part of the tape
down, into the slot in the cassette compart-
ment door.
• Close the cassette door.
• Set the FUNCTION switch to TAPE position.
• Press CASSETTE PLAY button.
• Set VOLUME control as desired.
• To stop the tape, press CASSETTE
STOP/EJECT button.
• To remove the tape, press CASSETTE
STOP/EJECT again, the cassette door opens.
• Take the tape out, turn it to another side and
insert back, if you want to listen to the
recording on the other side.
NOTE:
• If the unit is not to be used for a long time (2
weeks or more),disconnect the power cord
from the AC outlet.
• Do not leave the cassette buttons in pressed
positions, when you turn off the unit, as this
can damage the pinch roller.
23:39 Page 26
RECORDING FROM DVD DISCS
• Insert a tape into the cassette compartment.
• Insert a disc and close the DVD door.
• Set FUNCTION switch to DVD position.
• Press CASSETTE PAUSE button.
• Press CASSETTE RECORD and PLAY buttons,
to activate recording standby mode.
• Start DVD playback, by pressing DVD
PLAY/PAUSE button.
• Release CASSETTE PAUSE button, to start
recording.
• Press CASSETTE STOP/EJECT again to stop
recording.
• To listen to the recording, press REWIND, and
then PLAY button.
RECORDING FROM BUILT-IN RADIO
• Perform the steps described in the "Listening
to the RADIO" section.
• Insert a tape into the cassette compartment.
• Find the place on the tape, where you want to
start recording. For this:
1. Wind the tape to the beginning using REWIND
(or FAST FORWARD) buttons.
2. Tune to the radio station you want to record
and press CASSETTE RECORD and
CASSETTE PLAY buttons simultaneously.
Both buttons should return to their normal
position.
Now you are recording from the built-in radio
to the tape.
To stop recording, press CASSETTE
STOP/EJECT button.
NOTE: If you want to listen to the recording, first
press CASSETTE STOP/EJECT button, and
then REWIND button, after which press CAS-
SETTE PLAY button.
• Adjust the volume level as desired.

HEADPHONES JACK

Insert headphones with a 3.5 mm plug into
HEADPHONES jack, the speakers are auto-
matically disconnected.
WARNING! Listening at high volume levels
for long periods of time can damage your
hearing.
26