6.1.1 Fiber Inspection Tools
Figure 26.
JDS Uniphase/Westover FVD-2400 Benchtop
USB/PC Operated Fiber Viewer
Note: A special SMA adapter must be used with either the FS201 handheld inspection scope or the Westover Digital
inspection scopes. This custom adapter allows the scope to be used with the laser fiber and integral interlock ring.
The custom adapter may not be compatible with other fiber inspection equipment.
The following fiber inspection equipment can be purchased from Energetiq:
Table 8.
Energetiq Parts for Purchase
Energetiq Part Number Description
MW-00518
MW-00516
MW-6537
6.1.2 Fiber Cleaning Tools
1. Clean Dry Air or Pressurized Nitrogen
2. Dust Off (or similar clean, compressed air)
3. Isopropyl Alcohol
4. QbE Cleaning Platform (www.chemtronics.com/qbe-cleaning-platform-3)
EQ-99X Operation & Maintenance Manual
FS201 Fiber Inspection Scope with Custom SMA
Adapter
Custom Adapter from FS201 to EQ-99X
system Fiber
Custom Adapter from Westover Digital Microscope
to EQ-99X system Fiber
Figure 27.
FS-201 Handheld Fiber Inspection Scope
Use
Standalone Fiber Inspection
For use with an existing FS201 Fiber
Inspection Scope
For use with an existing Westover
Digital Microscope
Chapter 6. Maintenance
37 of 45