Optional Accessories; Attaching The Laser Fiber From The Controller To The Lamp Head - Hamamatsu ENERGETIQ LDLS EQ-99X Operation And Maintenance Manual

Qty Item Description
Black interconnecting cable from
1 lamp head to power supply controller
(9 pin mini D-sub)

4.1.2 Optional Accessories

The EQ-99X system shipping box may also contain the following optional accessories available from Energetiq:
Table 4. Optional Accessories in Shipping Box
Qty Item Description
EQ-99-RC Remote Control with interlock jumper
1
plug and 15-pin D-connector I/O cable
1 12 VDC Power Supply (universal input voltage)

4.2 Attaching the Laser Fiber from the Controller to the Lamp Head

The EQ-99X system is typically delivered with the laser fiber optic cable connected to the lamp head. This is done to
minimize the possibility of debris or particles contaminating the end of the laser fiber. If the power supply controller
of your EQ-99X system is shipped separately from the lamp head, follow the procedure below to attach the laser fiber
optic cable from the power supply controller to the lamp head.
EQ-99X Operation & Maintenance Manual
Picture
Picture
Chapter 4. Installation
19 of 45