Ocr Subset; Ocr Quiet Zone - Motorola Symbol DS9808 Product Reference Manual

10 - 14 Symbol DS9808 Product Reference Guide

OCR Subset

Parameter # F1 AEh
Set an OCR subset to define a custom group of characters in place of a preset font variant. For example, if
scanning only numbers and the letters A, B, and C, create a subset of just these characters to speed decoding.
This applies a designated OCR Subset across all enabled OCR fonts.
To set or modify the OCR font subset, first enable the appropriate OCR font(s). Next, scan the following bar code,
then scan numbers and letters to form the OCR Subset from the alphanumeric keyboard in the Advanced Data
Formatting Guide. Then scan
OCR Subset
To cancel an OCR subset, for OCR-A or OCR-B, scan OCR-A variant
For MICR E13B or US Currency Serial Number, create a subset which includes all allowed characters in that
character set, or scan an option from the

OCR Quiet Zone

Parameter # F1h B7h
This option sets the OCR quiet zone. The digital scanner stops scanning a field when it detects a sufficiently wide
blank space. The width of this space is defined by the End of Field option. Used with parsers that tolerate slanted
characters, the End of Field count is roughly a count of 8 for a character width. For example if set to 15, then two
character widths are an end of line indicator for the parser. Larger end of field numbers require bigger quiet zones
at each end of text line.
To set a quiet zone, scan the following bar code, then scan a two-digit number using the numeric keypad in the
Advanced Data Formatting Guide. The range of the quiet zone is 20 - 99 and the default is 50, indicating a six
character width quiet zone.
OCR Quiet Zone
in the Advanced Data Formatting Guide.
End of Message
Set Default Parameter on page 4-5
, or OCR-B variant
Full ASCII
and re-program the digital scanner.
.
Full ASCII